Overview
The AirLift LoadLifter 5000 57215 is a rear leaf spring leveling kit built on air springs, rated by AirLift for up to 5000 lbs. of leveling capacity. It is a rear air bag system marked as direct fit, but no vehicle years, makes or models are named for it.
The air springs use 2-ply fabric reinforced construction and inflate from 5 to 100 psi through quick connect polymer fittings, so the rear height can be set under varying loads.
Key features
- 2-ply fabric reinforced air springs
- Air adjustable from 5 to 100 psi
- Quick connect, easy-to-use polymer air fittings
- Reinforced air bellows for long-lasting strength
- Vehicle-specific illustrated installation manuals
- Limited lifetime warranty
Air spring leveling basics
An air spring leveling kit adds support to the rear of the vehicle so ride height can be adjusted as load changes. Air springs work by holding pressure, so when the vehicle is carrying a heavy load, a small pressure change can make a noticeable difference in height. Setting pressure gradually and checking the height after each change helps prevent overinflation and keeps the springs seated properly on their mounts.
Air springs age with heat, road grime and repeated flexing, so periodic inspection matters. Look for cracks, bulges or abrasion on the bellows, and check the fittings for air leaks with a soapy water test. A leak that slowly lowers the ride height often comes from a fitting rather than the spring itself. Keep the air lines clear of sharp edges and moving parts.
Leveling kits are often used alongside other rear suspension work, such as new shocks or a load-rated bumper, so consider how those parts affect height and ride. Plan the work in a clear area with the vehicle supported on stands, not only a jack.
- Set pressure in small steps and recheck height
- Inspect bellows for cracks and abrasion
- Test fittings for leaks after each change
- Release air before disconnecting any fitting
Specifications
| Brand | AirLift |
|---|---|
| Part number | 57215 |
| UPC | 729199572159 |
| Leveling capacity | Up to 5000 lbs. |
| Air adjustment range | 5 to 100 psi |
| Construction | 2-ply fabric reinforced air springs, reinforced air bellows |
| Fittings | Quick connect polymer |
| Application | Rear, direct fit |
| System type | Air bag |
| Warranty | Limited lifetime |
Vehicle fitment
Make sure the year, model and trim match your vehicle before buying. Compare the air spring mounting points with your rear suspension before starting.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
AirLift includes vehicle-specific illustrated installation manuals, and the kit carries an installation time of 2 hours or less. Air springs hold load when inflated, so release air before disconnecting any fitting.
What’s included
The kit includes the illustrated installation manuals and a limited lifetime warranty. Check the air springs, fittings and any hardware against the manual before starting.














