Overview
The AirLift 57229 is a rear leaf spring leveling kit from the LoadLifter 5000 line, with a load capacity of up to 5000 lbs. It is a no-drill kit with an installation time of 2 hours or less. No year, make or model is named.
Rear leveling and ride height
A leaf spring leveler raises the rear to offset weight or a sagging rear end, which changes the height of the axle and the angle of the driveline. Re-measure the height after installation and check that brake lines, shocks and the driveshaft still have clearance at full travel. Note the readings so you can compare them after future service.
Leveling kits do not add structural strength to the springs, so the load limit still depends on the vehicle, tires and axle. Leaf springs can take a set over time, so the rear height may drift and need a recheck. Look for cracked leaves, worn shackles and sagging spring packs when the kit is installed or the vehicle is serviced. Keep the load within what the vehicle and its tires are built to carry.
- Re-measure ride height after installation
- Check driveshaft angles and clearance
- Inspect shackles and spring leaves at service
Specifications
| Brand | AirLift |
|---|---|
| Part number | 57229 |
| UPC | 700007807971 |
| Product line | LoadLifter 5000 |
| Position | Rear |
| Drilling | No drill |
| Load capacity | Up to 5000 lbs. |
| Installation time | 2 hours or less |
Vehicle fitment
No vehicles are named for the 57229, so confirm which leaf spring applications it covers before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The kit is no drill, and the install is given as 2 hours or less. Because a leveler changes rear ride height, re-measure the height and check driveline angles when the job is done.
What’s included
Check the hardware included in the kit against your installation before starting.














