Overview
The AIRAID 510-312 is a cold air intake system from the MXP Series, supplied with an intake tube, a SynthaFlow oil filter and a full filter enclosure. It fits the 2012–2015 Toyota Tacoma in the Base, Pre Runner, TRD Pro and X-Runner trims.
The inlet track and filter combination is designed to be less restrictive than the factory configuration. A cold air design draws air from outside the engine bay rather than the warmer air under the hood, which is the main difference from a stock intake. The setup is meant to release more horsepower.
Key features
- Cold air intake type
- SynthaFlow oil filter element
- Full filter enclosure
- Intake tube included with the kit
- Inlet track that AIRAID describes as less restrictive than the factory configuration
- Direct fit design for the listed Tacoma trims
How cold air intakes work
A cold air intake pulls air from outside the engine bay, where the air is usually cooler and denser than the air trapped under the hood. Denser air carries more oxygen per breath, which is the reason cold air designs are used on trucks that work hard. The filter and tube must seal well so that only filtered air enters the engine.
Trucks that see off-road use or heavy loads may collect more dust and water in the intake path. Keep the air inlet clear of debris, and check the enclosure for cracks after rough trips. Regular inspection of the filter and clamps keeps the system working as designed.
- Keep the air inlet clear of debris
- Check the enclosure after rough trips
- Tighten every clamp at service
Specifications
| Brand | AIRAID |
|---|---|
| Part number | 510-312 |
| UPC | 642046513122 |
| Intake type | Cold Air |
| Filter housing type | Full Enclosure |
| Filter type | Oil (SynthaFlow) |
| Inlet tube | Included |
| Fitment type | Direct Fit |
Vehicle fitment
It fits the 2012–2015 Toyota Tacoma, covering the Base, Pre Runner, TRD Pro and X-Runner trims.
Other Tacoma generations and other Toyota models are outside its fitment. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
AIRAID describes installation as possible with basic hand tools. Because the inlet tube is part of the kit, check that every clamp and connection is tight before starting the engine.
What’s included
The kit includes the intake tube, the SynthaFlow filter and the filter enclosure.









