Overview
The AIRAID 311-276 is an MXP air intake system for the 2007–2011 Jeep Wrangler JK. It replaces the stock air box with a sealed housing and a large dry filter, and it is built to work with the factory cold air inlet.
It is a direct fit cold air intake with a partial enclosure filter housing. It fits the Rubicon, Sahara, Sport and X trims, the Unlimited versions of those trims, and the 70th Anniversary editions.
Key features
- Sealed air box design
- Uses the factory cold air inlet
- Compatible with aftermarket snorkel systems
- Oversize premium dry air filter
- Bolt-on installation
Sealed air box care
A sealed air box keeps the filter enclosed, which limits how much dust and water reach the element. The seal around the lid and the box mounting points still needs regular attention, because a gap at either spot lets unfiltered air in around the filter.
After trail use, open the box and check the element, the lid gasket and the inlet connection. Remove mud or sand from the box before it dries and hardens, and reseat the lid so the seal closes evenly.
When a snorkel is added, check how the snorkel joins the inlet, since the connection carries the same filtered air path. Loose clamps and cracked couplers are the most common sources of leaks in this setup.
- Check the lid gasket after trail use
- Remove mud and sand from the box
- Inspect snorkel couplers and clamps
Specifications
| Brand | AIRAID |
|---|---|
| Part number | 311-276 |
| UPC | 642046342760 |
| Intake type | Cold air |
| Filter housing type | Partial enclosure |
| Filter type | Dry |
| Inlet tube | Included |
| Fitment | Direct fit |
| CARB E.O. number | D-607-17 |
Vehicle fitment
Fits the 2007–2011 Jeep Wrangler (JK) in the Rubicon, Sahara, Sport, X, 70th Anniversary, Unlimited 70th Anniversary, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport and Unlimited X trims.
Earlier TJ and LJ Wranglers and the later JL generation are not covered by this fitment. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The install is bolt-on and works with the factory cold air inlet. Compare the included inlet tube with the stock components before removing them, and disconnect the battery before working near the intake.
What’s included
An inlet tube, an oversize premium air filter and a sealed air box assembly are included.












