Overview
The AIRAID Synthaflow Cold Air Dam Air Intake System (part number 200-196) is a cold air intake kit for 2007–2008 Cadillac Escalade, Chevrolet Avalanche, Silverado, Suburban and Tahoe, and GMC Sierra, Yukon and Yukon XL models, plus the 2007 GMC Yukon XL 2500. It uses a partial enclosure filter housing and an oiled filter and reuses the factory inlet tube.
The intake uses an inlet track and filter combination designed to be less restrictive than the factory setup. It is a direct fit, and the vehicles it covers are shown below.
Key features
- Cold air intake system
- Partial enclosure filter housing
- Oil filter type
- Reuses the factory inlet tube
- Inlet track and filter combination that is less restrictive than the factory configuration
- Direct-fit design
Keeping an oiled filter clean
An oiled filter gives good airflow when it is clean and properly oiled, and it needs regular care to keep working as intended. Dust, pollen and road grit build up on the filter media, and too much dirt can restrict airflow and dull throttle response. Inspect the element at each oil change, especially in dusty conditions, and clean it before the dirt packs into the pleats.
Cleaning and oiling should follow the filter’s own care steps, with a light, even coat of oil. Let the filter dry fully before fitting it, since wet media can disturb the mass airflow sensor. Re-check the partial enclosure housing for cracks and make sure the lid seals against the housing so unfiltered air does not sneak in around the edges.
Specifications
| Brand | AIRAID |
|---|---|
| Part number | 200-196 |
| Product type | Cold air intake system |
| Intake system type | Cold air |
| Filter housing type | Partial enclosure |
| Filter type | Oil |
| Inlet tube | Reuse factory |
| Fitment | Direct fit |
Vehicle fitment
It fits these vehicles:
- 2007–2008 Cadillac Escalade (Base, Platinum)
- 2007–2008 Cadillac Escalade ESV (Base, Platinum)
- 2007–2008 Cadillac Escalade EXT (Base)
- 2007–2008 Chevrolet Avalanche (LS, LT, LTZ)
- 2007–2008 Chevrolet Silverado 1500 (LS, LT, LTZ, WT)
- 2007–2008 Chevrolet Silverado 2500 HD (LT, LTZ, WT)
- 2007–2008 Chevrolet Silverado 3500 HD (LT, LTZ, WT)
- 2007–2008 Chevrolet Suburban 1500 (LS, LT, LTZ, Z71)
- 2007–2008 Chevrolet Suburban 2500 (LS, LT, LTZ)
- 2007–2008 Chevrolet Tahoe (Hybrid, LS, LT, LTZ)
- 2007–2008 GMC Sierra 1500 (SL, SLE, SLT, WT)
- 2007–2008 GMC Sierra 2500 HD (SLE, SLT, WT)
- 2007–2008 GMC Sierra 3500 HD (SLE, SLT, WT)
- 2007–2008 GMC Yukon (Denali, SLE, SLT)
- 2007–2008 GMC Yukon XL 1500 (Denali, SLE, SLT)
- 2007 GMC Yukon XL 2500 (SLE, SLT)
Each line gives the model years, make and model, with trims in parentheses.
The fit covers 2007–2008 model years only, plus the 2007 Yukon XL 2500. Other model years and engines are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Follow the included installation instructions for the cold air intake, including hose, clamp and sensor connections, and make sure every connection is secure before starting the engine. Check local emissions regulations for aftermarket intake parts, and re-inspect clamps and mounting points after the first miles of driving.
What’s included
A cold air intake system with a filter and partial enclosure housing. Check the package contents against your installation before starting.









