Overview
The AIRAID SynthaMax Cold Air Dam air intake system, part number 201-207, is a dry-filter cold air intake with an included inlet tube. The inlet track paired with its filter is designed to restrict airflow less than the OE configuration.
The filter housing is steel with a black finish, and the intake tube is polyethylene with a natural finish. It is designed as a direct fit, with no make, model or year named here.
Key features
- Dry filter type
- Cold air intake type
- Inlet tube included
- Inlet track and filter pairing that the brand describes as less restrictive than OE
Cold air intake considerations
Cold air intakes draw air from outside the engine bay, which can mean cooler air but also more exposure to water and debris. A dry filter does not hold oil, so it sheds dust differently than an oiled filter and usually needs to be cleaned or replaced rather than re-oiled. Think about where the inlet tube runs, since a tube that sits low can pull in standing water during a deep crossing.
Steel housings resist impact better than thin plastic, but they can still dent if the vehicle is pushed through brush. Inspect the housing, tube joints and any seals after trail use to catch loose clamps or cracks early. When the filter looks dirty or the engine seems to breathe harder than usual, inspect the element first before assuming a larger problem.
- Clean or replace the dry filter after dusty trips
- Check the inlet tube path for low water exposure
- Tighten clamps after rough terrain driving
Specifications
| Brand | AIRAID |
|---|---|
| Part number | 201-207 |
| UPC | 642046242077 |
| Intake type | Cold air |
| Filter type | Dry |
| Filter housing material | Steel |
| Filter housing finish | Black |
| Filter housing type | Full enclosure in one spec list, partial enclosure in another |
| Intake tube | Included; polyethylene, natural finish |
Vehicle fitment
It is designed as a direct fit. Confirm fit for your year, model and engine before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Confirm the filter housing type, full or partial enclosure, before choosing a mounting position.
What’s included
The inlet tube is included. Match the tube to your install plan before mounting.









