Overview
The AEM 22-680C is a cold air intake kit that replaces the stock air filter and intake tube while keeping the factory air box in place. It uses a low restriction aluminum intake tube for an easy horsepower upgrade.
The kit is meant for drivers who want sharper throttle response and a stronger engine sound without a full rebuild of the intake. Its washable dry filter is rated by AEM for up to 100,000 miles before service, depending on driving conditions. Vehicle applications are covered in the fitment section below.
Key features
- Low restriction aluminum intake tube that replaces the stock intake tube.
- Replaces the stock air filter while retaining the factory air box.
- Washable, reusable dry air filter that AEM rates for up to 100,000 miles before service.
- Complete hardware is included in every kit.
- Steel heat shield and reinforced brackets.
- Designed to improve throttle response and engine sound.
- The kit is designed to add torque and horsepower while improving filtration.
- AEM Lifetime Limited Warranty.
Intake tube and filter care
A cold air intake with an aluminum tube holds its shape well, but the tube still needs regular checks. Look at the joints where the tube meets the filter and the throttle body, and make sure the clamps are snug without crushing the tube. Heat from nearby exhaust parts can soften plastic connectors, so confirm clearance.
Since the factory air box stays in place, the filter is the part most likely to need attention. Washable dry filters are cleaned by tapping loose dirt out or blowing compressed air from the clean side outward. Avoid oil, water and solvents, and dry the element fully before reinstalling it.
Think about the rest of the system when choosing this kind of intake. Exhaust changes, tuning and other airflow parts all affect how the engine responds, so plan those upgrades together. Keep a record of your filter cleaning dates so the next service is easy to track.
Specifications
| Brand | AEM |
|---|---|
| Part number | 22-680C |
| UPC | 24844352859 |
| Intake tube material | Aluminum, low restriction |
| Inlet tube | Included |
| Filter type | Dry, washable and reusable |
| Filter service life | Up to 100,000 miles, depending on driving conditions |
| Filter housing type | Open |
| Intake type | Cold air |
| Fitment | Direct Fit |
| CARB E.O. number | D-670-20 |
| Warranty | AEM Lifetime Limited Warranty |
Vehicle fitment
No make, model or year is named for this kit, so confirm fit for your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the factory air box stays in place, the work centers on the filter and intake tube. Installation is straightforward and needs little mechanical experience. Keep the tube and filter clear of hot exhaust and engine parts, and tighten every clamp before starting the engine.
What’s included
The kit includes the aluminum intake tube, the replacement dry air filter and the hardware, which AEM says comes complete with every kit. The steel heat shield and reinforced brackets are part of the same kit description.
















