Select your vehicle

Crown Automotive Pilot Bushing – 33004041

Crown Automotive

$9.99In stock
Buy on Amazon

See similar parts on Amazon

Price and availability as of Nov 17, 2026 4:40 AM MST, from Amazon.com, and subject to change. The Amazon listing has the current details.

Check out with your Amazon account. Amazon handles delivery and returns.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Crown Automotive 33004041 pilot bushing
  • Fitment list covers 1987–1991 Jeep Cherokee XJ, Comanche and Wrangler YJ
  • Also covers the 1987 Jeep J10 and 1987–1990 Jeep Wagoneer SJ

Description

Overview

The Crown Automotive 33004041 is a pilot bushing for 1987–1991 Jeep Cherokee (XJ), 1987–1991 Jeep Comanche, 1987–1991 Jeep Wrangler (YJ), the 1987 Jeep J10 and 1987–1990 Jeep Wagoneer (SJ). A pilot bushing sits in the crankshaft and supports the front end of the transmission input shaft, so the bushing has to match the engine and transmission combination it is installed in.

The bushing sits in the crankshaft and supports the front end of the transmission input shaft, so it must match the engine and transmission combination. It is a direct fit, with part number 33004041 and UPC 848399011807.

Key features

  • Pilot bushing for the crankshaft end of the transmission input shaft
  • Covers Cherokee XJ, Comanche, Wrangler YJ, J10 and Wagoneer SJ models
  • Fitment years run from 1987 through 1991
  • Fitment marked as direct fit

Pilot bushing and clutch alignment

The pilot bushing centers the clutch disc on the input shaft during installation, so its condition affects how the clutch engages. A bushing that is loose, worn or scored can let the input shaft wobble, which shows up as noise and uneven disc wear. Because access is easiest with the transmission out, the bushing is usually inspected during a clutch job.

Use an alignment tool that fits the input shaft to center the disc before the pressure plate is tightened. Check that the tool slides freely through the bushing, and clean any debris from the crankshaft bore before fitting. Keep the release bearing and fork free of grease contamination.

  • Inspect the bushing bore for scoring or looseness
  • Use an alignment tool that slides freely through the bushing
  • Clean debris from the crankshaft bore before fitting

Specifications

Brand Crown Automotive
Part number 33004041
UPC 848399011807
Part type Pilot bushing
Fitment years 1987–1991 (Wagoneer 1987–1990)
Fitment type Direct fit

Vehicle fitment

It fits the 1987–1991 Jeep Cherokee (XJ), the 1987–1991 Jeep Comanche, the 1987 Jeep J10, the 1987–1990 Jeep Wagoneer (SJ) and the 1987–1991 Jeep Wrangler (YJ).

Make sure the year, model and trim match your vehicle before ordering.

What’s included

One pilot bushing. One pilot bushing, with no accessories described.

SKU: CRO33004041 Category:

Specification

Shipping weight 0.08 lbs
Package dimensions 1.00 × 1.00 × 0.80 in
brands

Fitment

VehicleYearsTrims
Jeep Cherokee (XJ)1987–1991Base, Briarwood, Chief, Laredo, Limited, Pioneer, Sport
Jeep Comanche1987–1991Base, Chief, Eliminator, Laredo, Pioneer
Jeep J101987Base
Jeep Wagoneer (SJ)1987–1990Base, Limited
Jeep Wrangler (YJ)1987–1991Base, Islander, Laredo, Renegade, S, Sahara, Sport

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Does the Crown Automotive 33004041 fit a 1989 Jeep Wrangler YJ?

Yes. It fits the 1987–1991 Jeep Wrangler (YJ), so a 1989 model falls within the years it covers. Confirm the trim on your vehicle before ordering.

What does a pilot bushing do?

It supports the end of the transmission input shaft where it enters the crankshaft. Compare the new bushing against the original before installing it, since dimensions must match the engine and transmission.

Which Jeep models does the 33004041 pilot bushing fit?

It fits the 1987–1991 Jeep Cherokee (XJ), Comanche and Wrangler (YJ), the 1987 Jeep J10 and the 1987–1990 Jeep Wagoneer (SJ). Verify the model and trim against your vehicle before buying.

Should the pilot bushing be replaced during every clutch job?

Often, yes, when the transmission is out. A worn bushing can let the input shaft wobble and cause noise and clutch wear. Inspect the bushing bore and replace the bushing if it is loose or scored.

What tool is used to align the clutch disc?

An alignment tool centers the clutch disc on the input shaft before the pressure plate is tightened. Choose the correct size for your disc and check that it slides freely through the bushing.

Ready to order?

Order this part on Amazon and check out with your Amazon account. Amazon handles delivery and returns.

Buy on Amazon