Overview
The Universal Spare Tire Carrier, part number T99918NA01NA, is a bed-mounted carrier that holds a full-size spare in the bed of a truck, for use when the factory spare location is not possible. It is sized for a tire up to 40 inches tall and 14 inches wide and is designed for most modern truck beds.
Slots in the front and back of the carrier support a Y-strap, with 2 anchor points in the rear and one in the front. A series of mounting holes lets you place it anywhere in the bed, and the holes are sized so two carriers can sit side by side. The carrier is sold individually, not as a pair.
Key features
- Universal fit designed for most modern truck beds
- Sized for a tire up to 40 inches tall and 14 inches wide
- Slots for a Y-strap, with 2 anchor points in the rear and one in the front
- Series of mounting holes to place it anywhere in the bed
- Two carriers can be mounted side by side
Choosing a spare location
A bed-mounted carrier moves the spare out of the underbody, which can free up space and keep the tire away from the factory location. Check the bed floor, the tailgate and any cargo before choosing where the carrier sits, so the tire does not rub the bed rails or block the tailgate when it is open.
A carrier with a series of mounting holes lets you position the tire to suit the cargo, but tire weight and bed floor strength both matter. Use a strap through the front and rear slots, and keep the tire clear of hot exhaust or the fuel fill. Check the anchor points and mounting bolts after rough roads, since the tire will move under load.
- Clear the tailgate before setting position
- Keep the tire away from the fuel fill
- Recheck anchors after rough roads
Specifications
| Brand | Addictive Desert Designs |
|---|---|
| Part number | T99918NA01NA |
| Product type | Universal spare tire carrier |
| Location | Bed mount |
| Maximum tire size | 40 inches tall and 14 inches wide |
| Y-strap anchor points | Two at the rear, one at the front |
| Quantity | Sold individually, not in a pair |
| Fit type | Universal |
Vehicle fitment
It is a universal fit for most modern truck beds and is not made for a specific vehicle. Measure your tire and bed against the carrier’s dimensions before mounting.
The 40 inch by 14 inch figures are measured limits. Measure the tire itself, since its actual height and width can differ slightly from the size a tire maker advertises.
Installation notes
Run a Y-strap through the front and rear slots to hold the tire, and check that the strap suits the load before driving.














