Overview
The Rugged Ridge Spartacus HD Tire Carrier Hinge Casting, part RUG11546.56, is a hinge replacement for the 2018–2026 Jeep Wrangler JL. It is built to carry an oversized spare on the tailgate, and it takes the place of the factory tailgate hinges.
The casting is a one-piece die-cast aluminum design that links the tailgate to the body. Forged steel hinge brackets and hardened steel pins are used with it, giving a higher load capacity than the factory hinges. It is designed to allow one-handed access to the rear cargo area.
Key features
- One-piece die-cast aluminum hinge casting, a complete replacement for the factory tailgate hinges
- Forged steel hinge brackets and hardened steel pins
- One-handed access to the rear cargo area
- Compatible with OE and most aftermarket rear bumpers
- Installs with no drilling required
- Patent pending design
Before you buy
A tailgate hinge carries the weight of the door and any spare mounted on it, so the hinge points are where stress concentrates. A spare-carrying hinge works under more load than the stock hinge, which is why the mounting bolts and the bumper below should be inspected regularly. Look for cracks around the casting, loose fasteners, and paint lifting near the pins.
When choosing a setup, consider the wheel mount, the spare tire size and the bumper that will support the rear assembly. Hinge and wheel mount are often replaced together when a tailgate starts to sag or bind. Tire carriers add weight at the rear, so the body and suspension should be considered as part of the load. Lubricate the pins on a schedule and recheck fastener torque after the first few trail runs.
Specifications
| Brand | Rugged Ridge |
|---|---|
| Part number | RUG11546.56 |
| Application | Jeep Wrangler JL, 2018–2026 |
| Hinge casting material | Die-cast aluminum |
| Hinge brackets | Forged steel |
| Pins | Hardened steel |
| Recommended wheel mount | Spartacus HD Tire Carrier Wheel Mount, P/N 11546.57 |
| Drilling | Not required |
| Fitment type | Direct fit |
Vehicle fitment
It is a direct fit for the 2018–2026 Jeep Wrangler JL, in 2-door and 4-door models.
Pre-2018 Wranglers and Gladiator pickups are outside this casting’s list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The casting takes the place of the factory tailgate hinges and mounts without drilling. Check the mounting hardware and tailgate alignment against your installation before starting.
What’s included
The package contains the hinge casting and its part number only. The Spartacus HD Tire Carrier Wheel Mount, P/N 11546.57, pairs with this casting for the carrying capacity the system is designed for. It is sold separately.
















