Overview
The Poison Spyder Customs Frame Mounted Tire Carrier, part number 19-62-030TP1, is a swing-out spare tire carrier for the Jeep Wrangler JL that bolts directly to the frame. It fits the 2019 Wrangler JL, in 2-door and 4-door Unlimited versions.
Poison Spyder says frame mounting removes the weight and stress of a large, heavy spare from the tailgate, body tub and bumper. A triangulated mounting bracket secures the carrier to the frame rail and rear crossmember in three planes. The carrier is tethered to the tailgate rather than latching to itself, so one hand opens the tailgate and carrier together.
The pivot is concealed below the rear bumper deck and tucks in closer to the body for better trail clearance. It uses a CNC machined spindle and housing with a pair of Timken tapered roller bearings, and spindle seals keep lubrication in and dirt and water out.
Key features
- Frame mounted with a triangulated bracket on the frame rail and rear crossmember
- Single-action opening: the carrier is tethered to the tailgate and opens with it
- Concealed heavy-duty pivot with Timken tapered roller bearings
- CNC laser cut, brake-formed plate steel, welded in an assembly fixture
- Adjustable up and down and in and out for tires up to 40 inches
- Wheel plate for 5×5, 5×4.5, 5×5.5, 6×5.5 and 8×6.5 bolt patterns
- License plate mount at the center of the spare, and tie-in loops for wiring
- SpyderShell Armor Coat finish with a 5-year warranty
Keeping the carrier in service
A spare tire on a tailgate pulls down on the hinges and can flex the tailgate over time. Moving the spare to a frame mount takes that load off the body, but the pivot and its bearings then carry the weight of the tire on every swing. Keep the pivot clean and lubricated so the bearings and seals keep working as designed.
Check the frame bracket bolts and the carrier’s mounting points after the first few trail trips, since the tire moves with every bump. Keep the tie-in loops and license plate wiring clear of moving parts, and recheck the tire’s lug nuts after rotation. A spare that is loosely mounted can rattle or shift on rough ground.
- Lubricate the pivot on a regular schedule
- Check frame bracket bolts after rough trail use
Specifications
| Brand | Poison Spyder Customs |
|---|---|
| Part number | 19-62-030TP1 |
| Product type | Frame mounted tire carrier, Jeep JL |
| Mount location | Frame |
| Maximum tire size | 40 inches |
| Wheel bolt patterns | 5×5 (JL stock), 5×4.5, 5×5.5, 6×5.5 and 8×6.5 |
| Construction | CNC laser cut, brake-formed plate steel |
| Bearings | Timken tapered roller bearings with spindle seals |
| Finish | SpyderShell Armor Coat, semi-gloss black |
| Warranty | 5-year on the finish |
| Fit type | Direct fit |
Vehicle fitment
It fits the 2019 Jeep Wrangler (JL), including Sport, Sport S, Rubicon and the Unlimited Sport, Sport S, Sahara and Rubicon 4-door versions. It is designed for the JL and works with Poison Spyder Bruizer and Crawler series rear bumpers for that Wrangler.
Other model years of the JL and earlier Wranglers such as the JK are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The carrier can be added later to a Poison Spyder Bruizer or Crawler rear bumper without replacing or altering the bumper, although the bumper has to be removed during installation. The carrier can also be installed without any bumper at all.
The assembly includes tie-in loops along the cable-way for the wiring of a license plate light, third brake light or backup camera. Poison Spyder’s License Plate Delete Cover and LED License Plate and 3rd Brake Light are available separately.
What’s included
The frame mounted tire carrier with its license plate mount.
Not included: the optional Hi-Lift jack mount, the License Plate Delete Cover and the LED License Plate and 3rd Brake Light, each available separately.









