Overview
The Addictive Desert Designs HoneyBadger winch front bumper for the Toyota Tacoma, part ADSF687382730103, is a steel front bumper with a winch mount and a universal light mount system. It is made from 1/8-inch external steel plating with removable 1/8-inch aluminum accent panels.
The bumper has an aggressive look and is meant to protect the front-end components of the truck. Reinforced clevis mounts made from 1-inch steel are designed to accept a 3/4-inch D-ring, so the bumper gives a solid point for a 3/4-inch D-ring shackle.
A universal light mount system sits in the center of the bumper and can hold up to six cube lights or a 30-inch straight or radius LED bar. Lights from any brand and size can be mixed to suit the lighting setup. Additional lighting fits behind the side accent panels, where a Rigid Industries 10-inch LED can be mounted on each side.
Key features
- 1/8-inch external steel plating with removable 1/8-inch aluminum accent panels
- Winch mount compatible
- Reinforced clevis mounts made from 1-inch steel for 3/4-inch D-rings
- Universal center light mount for up to six cube lights or a 30-inch straight or radius LED bar
- Side panel mounts for a 10-inch Rigid Industries LED on each side
- Full-width bumper design
Winch and recovery planning
A winch changes the load on the front bumper, so the mounting and the bumper’s bolts should be checked after the winch is installed. Winch mounting depends on the winch model, so choose the winch first and confirm its mounting requirements against the bumper before ordering. Plan the cable route to avoid pinching lines and sensors.
The clevis mounts take 3/4-inch D-rings, and shackles should be rated for the load. Use a rated strap or line for recovery and keep people clear of the line path. After a recovery, inspect the bumper for cracked welds, bent brackets and loose hardware, and check the winch cable for fraying.
- Re-torque bumper bolts after the first trail use
- Inspect the winch cable for frayed strands
- Keep the light mounts clear of the winch line
Specifications
| Brand | Addictive Desert Designs |
|---|---|
| Part number | ADSF687382730103 |
| Position | Front |
| Width | Full |
| Material | Steel with aluminum accent panels |
| Plating | 1/8-inch external steel |
| Accent panels | 1/8-inch aluminum, removable |
| Finish | Black powder coat |
| Winch mount | Compatible |
| D-ring mounts | Included, reinforced clevis mounts made from 1-inch steel for 3/4-inch D-rings |
| Light mounts | Included, universal center mount and side panel mounts |
| Installation type | Direct fit |
Vehicle fitment
It is a direct fit for the 2016–2022 Toyota Tacoma and is designed for the truck’s front end.
Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
The bumper is designed for the Tacoma’s front end, and the clevis mounts are sized for 3/4-inch D-rings. Winch mounting depends on the winch you choose, so check the winch’s mounting requirements before ordering the bumper.
What’s included
The steel front bumper with its clevis mounts for 3/4-inch D-rings, the universal center light mount and the side panel light mounts.
Not included: Lights, cube lights, LED light bars, D-ring shackles and a winch.
