Overview
The Addictive Desert Designs Stealth Fighter front bumper, part ADSF451202190103, is a low profile radius plate steel front bumper for the 2021–2022 Chevrolet Colorado ZR2. A 30-inch universal light mount sits inside the bumper, so it can take a 30-inch radius LED bar or up to eight cube lights.
The bumper has four additional mounting points for 6-inch round lights along the top edge. A separate mounting plate lets the winch load run straight into the vehicle’s frame, and reinforced clevis mounts give a strong point for 3/4-inch D-rings.
The front fascia has to be cut for removal of the factory part, but otherwise the bumper is designed to be bolt-on. The factory skid plate can be reused with minor trimming. The bumper is made in America.
Key features
- Low profile radius plate steel design
- Universal 30-inch center light mount, for a 30-inch radius LED bar or up to eight cube lights
- Four mounting points for 6-inch round lights along the top of the bumper
- Separate winch mounting plate that carries the winch load to the vehicle’s frame
- Reinforced clevis mounts for 3/4-inch D-rings
- Factory skid plate can be reused with minor trimming
Frame-mounted winch setups
A winch load is only as strong as the path it takes into the vehicle. A separate mounting plate that ties the winch to the frame moves the load away from the bumper skin, which matters when pulling hard or at an angle. Before a recovery, confirm the plate and frame attachment points are tight and free of cracks or corrosion.
A low-profile bumper sits closer to the ground, so its lowest point matters on steep approaches and ledges. Keep an eye on the bumper edge during trail work and avoid dragging it over obstacles. Winch rope should be inspected for fraying, and the hook and line should be replaced when damaged.
- Check the frame mounting plate after heavy pulls
- Inspect winch rope for fraying
- Watch the bumper’s lowest edge on ledges
- Keep the fairlead clear of debris
Specifications
| Brand | Addictive Desert Designs |
|---|---|
| Part number | ADSF451202190103 |
| Position | Front |
| Material | Radius plate steel |
| Profile | Low profile |
| Light mounts | 30-inch universal center mount, plus four 6-inch round light mounting points |
| Winch mount | Separate mounting plate, mounted to the frame |
| D-ring mounts | Reinforced clevis mounts for 3/4-inch D-rings |
| Country of manufacture | Made in America |
| Installation type | Bolt-on after factory fascia is cut |
Vehicle fitment
It is a direct fit for the 2021–2022 Chevrolet Colorado ZR2.
It fits 2021–2022 Colorado ZR2 models. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
The front fascia will need to be cut for removal of the factory fascia. Otherwise the bumper is bolt-on, and the factory skid plate can be reused with minor trimming.
What’s included
The low profile steel front bumper with its universal center light mount, the four round light mounting points, the separate winch mounting plate and the reinforced clevis mounts.
Not included: Winch, LED light bars, cube lights, 6-inch round lights and D-ring shackles.
















