Overview
The Addictive Desert Designs ADD-Lander Overland Rack in black, part number ADSC698832000103, is a roof rack for the 2005–2020 Toyota Tacoma. It measures 56 inches wide, 60 inches long and 16 inch high, and it is built for overlanding loads. It uses a tube and plate design that gives it a distinctive look.
The rack’s side rails and center cross members have slotted mounting holes, so almost any off-road accessory can be attached. It is built sturdy enough to carry heavier items on top, such as rooftop tents. It mounts to the Tacoma in bed rail system, so installation needs no drilling or cutting. It is made in America.
Key features
- Tube and plate design with a distinctive look, per the manufacturer
- Side rails and center cross members with slotted mounting holes for almost any off-road accessory
- Sturdy construction that supports heavier items on top, such as rooftop tents
- Mounts to the Tacoma in bed rail system, so drilling and cutting are not required
- Black powder coat finish
- 5 planks, 56 inches wide and 60 inches long
- Made in America
Loading a roof rack safely
A roof rack changes how a truck handles, so load it low and centered. Heavier gear such as a rooftop tent raises the center of gravity, which affects braking, cornering and crosswind stability. Spread the weight across the planks rather than placing it at one end, and secure everything before driving on rough trails.
Because the rack mounts to the bed rails, check the bed rail connections after the first few trips and whenever the load changes. Look for loose clamps, worn bolts and any shifting. Slotted holes make it easy to add accessories, but each accessory should be fastened so it cannot slide or rattle.
- Retighten mounting hardware after the first drive
- Check straps and fasteners before long drives
- Inspect the rack for cracks or bent planks after rough trails
- Keep rooftop tents and heavy items centered on the planks
Specifications
| Brand | Addictive Desert Designs |
|---|---|
| Part number | ADSC698832000103 |
| Product type | Overland roof rack |
| Material | Aluminum |
| Finish | Black powder coat |
| Width | 56 inches |
| Length | 60 inches |
| Height | 16 inch |
| Number of planks | 5 |
| Cross bars included | No |
| Installation | Drilling is not required |
| Fitment type | Direct fit |
Vehicle fitment
It is a direct fit for the 2005–2020 Toyota Tacoma, covering the Base, Limited, Pre Runner, SR, SR5, TRD Off-Road, TRD Pro, TRD Sport and X-Runner trims. It mounts to the Tacoma bed rail system.
The listed fitment covers Tacoma models only, so other Toyota trucks and SUVs are not on the list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the rack attaches to the Tacoma in bed rail system, no drilling or cutting is needed. Mounting is set by the bed rails, so the rack’s position depends on how it is fitted to them. Heavy loads such as rooftop tents raise the vehicle’s center of gravity, so keep the load within the limits of the rack and the Tacoma, and drive with added caution when the top is heavily loaded.
What’s included
The kit includes the ADD-Lander Overland Rack in black. Cross bars are not included.
Not included: Cross bars. Rooftop tents and other accessories are not part of the rack.
