Overview
This 50 inch LED light bar mount (black, LIGTJ9706) is a bare steel bracket set for a light bar mounted above the windshield of a Jeep Wrangler. The mount is CNC laser cut from 3/16 inch thick plate, then brake-formed and finish welded for strength, and it is designed for a 50 inch Rigid Industries light bar.
The contoured, gusseted design holds the bar securely on the highway or in rough terrain. Installation uses the existing lower windshield bracket bolts. The mount is shipped bare steel so the owner can paint or powder coat it, and longer hardware may be needed from a local hardware store.
Key features
- CNC laser cut bare steel from 3/16 inch plate
- Brake-formed and finish welded construction
- Contoured, gusseted design for a heavy light bar
- Rubber liners protect the paint under the mounts
- Shipped bare for paint or powder coat
Before you mount the bar
A windshield-mounted light bar sits in the airflow and moves with the vehicle, so the mount has to hold the weight steady on rough trails and at highway speed. Before drilling or fastening anything, check that the bar clears the top of the windshield, the wiper arms and any roof-mounted gear. Sit in the driver’s seat and confirm the beam will not blind oncoming traffic when the bar is switched on.
Vibration is the main long-term threat. Re-check the bolts after the first few trail runs, since they can back off as the bar settles. Keep the wiring loose at the mount so it is not pulled tight, and use a fused feed to protect the vehicle wiring. Inspect the rubber liners for wear each time you clean the bar, and replace them if they flatten or crack.
- Re-tighten bolts after early trail runs
- Keep wiring slack at the mount
- Check rubber liners for flattening or cracks
- Clear the wiper arms before final placement
Specifications
| Brand | Genuine Packages |
|---|---|
| Part number | LIGTJ9706 |
| UPC | 700007631351 |
| Mount type | Windshield light bar bracket, direct fit |
| Material | Steel, 3/16 inch thick plate |
| Finish | Bare steel |
| Light bar | 50 inch, Driving/Fog/Flood combination beam |
| Listed light bar rating | 288W LED power, 25920 raw lumens |
| Hardware | Existing lower windshield bracket bolts; longer hardware may be needed |
| Sold as | Bracket kit |
Vehicle fitment
This mount is made for a Jeep Wrangler. Confirm fit for your vehicle’s year, model and trim before ordering. Because the bracket attaches at the lower windshield bolts, compare that bolt pattern with the mount before you buy. The 50 inch bar is a large unit, so measure the space above your windshield first.
Installation notes
Installation uses the existing lower windshield bracket bolts. Longer hardware may be needed from a local hardware store, so have the correct bolts on hand before installing. The rubber liners go between the mount and the paint, so fit them before tightening the bar.
What’s included
The bare steel bracket set for a 50 inch light bar. The light bar itself is not included, so this is a light bar mount only.


















