Overview
The 7425141 is a short two-piece push-through center cap measuring 4.25 inches. It is made for wheels with P/N end 83 and 85.
The short length sets it apart from the longer version of the same cap. Compare the height and color with the cap being replaced before ordering.
Key features
- Two-piece push-through design
- 4.25-inch diameter
- Short profile
Two-piece cap care
Two-piece push-through caps have a separate inner and outer part, and the two can loosen or separate after repeated cleaning or hard impacts. When cleaning, lift the cap and rinse the inside as well as the face, since trapped mud can push the halves apart. Check that both pieces sit flush after each wheel removal, and tighten the cap evenly so it does not sit crooked.
Short caps sit lower in the wheel center, which can make them harder to pry out than a taller cap. Use a flat tool at the edge rather than the face to avoid marking the finish. If the cap cracks or one piece is missing, replace the full set rather than relying on a single half, since a mismatched pair will not seat evenly.
Specifications
| Brand | Pro Comp Alloy Wheels |
|---|---|
| Part number | 7425141 |
| UPC | 844658006041 |
| Diameter | 4.25 inches |
| Design | Two-piece, push-through |
| Length | Short |
| P/N end | 83 and 85 |
Vehicle fitment
This cap is a wheel accessory with no named vehicle. Match it to the P/N end 83 and 85 designation on your wheel before ordering.
What’s included
One center cap is included. Check the package contents against your installation before starting, including the number of pieces.









