Select your vehicle

Pro Comp Center Cap – 502951500

Pro Comp Alloy Wheels

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Pro Comp 502951500 satin black push-through center cap
  • Closed cap with a 5.15 center bore
  • Listed bolt patterns: 8×6.5, 8×170 and 8×180
  • Universal fit, matched to the wheel rather than a vehicle

Description

Overview

The Pro Comp 502951500 is a satin black push-through center cap made for Pro Comp alloy wheels. It is a closed cap with a 5.15 center bore, and the listed bolt patterns are 8×6.5, 8×170 and 8×180.

Center caps cover the hub area of the wheel, so the bore and bolt pattern are the sizing points to check against your wheels before you choose this cap.

Key features

  • Satin black finish
  • Push-through style
  • Closed cap design
  • 5.15 center bore
  • Fits wheels with 8×6.5, 8×170 and 8×180 bolt patterns.

Seating a push-through cap

A center cap covers the hub area and hides the lug nuts from view. A closed face keeps dirt and water out of the hub more effectively than an open design, which is why closed caps are the usual choice for wheels that get wet or muddy.

A push-through cap is pressed into the center bore and held by fit alone, so the bore diameter matters more than the outer size of the cap. Measure the bore on the wheel itself rather than relying on the wheel name, and confirm the bolt pattern matches the stud layout before pressing the cap in.

When the wheel comes off for tire service or brake work, look at the rim around the bore for corrosion or burrs that could stop the cap from sitting flat. Seat the cap by hand, then tap it evenly with a soft mallet if needed, and avoid forcing it in at an angle.

  • Clean the bore and cap seat before fitting
  • Check that the cap sits flush with the wheel face
  • Recheck seating after the first few drives
  • Keep the cap with its wheel when rotating tires

Specifications

Brand Pro Comp Alloy Wheels
Part number 502951500
UPC 844658026537
Finish Satin black
Cap style Push-through
Open or closed Closed
Center bore 5.15
Bolt patterns 8×6.5, 8×170 and 8×180

Vehicle fitment

It is not vehicle-specific. It is sized to the wheel, so the 5.15 center bore and the 8×6.5, 8×170 or 8×180 bolt pattern must match the wheel it goes on. Confirm both measurements on the wheel before fitting.

Confirm your vehicle’s year, model and trim before ordering.

What’s included

The satin black center cap, part number 502951500. Not included: the wheel and lug hardware.

SKU: PXA502951500 Category:

Specification

Shipping weight 1.50 lbs
Package dimensions 5.50 × 5.00 × 5.00 in
brands

Questions & Answers

Does the Pro Comp 502951500 center cap cover an 8x170 wheel?

Yes. The 8x170 bolt pattern is one of the listed patterns, along with 8x6.5 and 8x180. Check that your wheel uses one of these patterns and that its center bore suits the 5.15 size before fitting the cap.

What finish and style is the 502951500 center cap?

It has a satin black finish and a push-through style. It is a closed cap with a 5.15 center bore, so it is not an open design.

Is this center cap tied to one vehicle?

No. The cap is matched to the wheel's center bore and bolt pattern rather than to a specific vehicle model. Confirm those two measurements on your wheels before ordering.

How do I know if a push-through cap is seated correctly?

A correctly seated cap sits flush with the wheel face and does not rock when pressed. Check it after the first few drives, since vibration can loosen a cap that was only partly pressed in. If it moves, remove it, clean the bore and refit it.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon