Overview
The Pro Comp 603186500 is a closed, screw-in center cap for Pro Comp alloy wheels. The bolt patterns it lists are 8×6.5, 8×170 and 8×180.
Because it fits by wheel rather than by vehicle, the wheel’s bolt pattern decides the match.
Key features
- Screw-in cap type
- Closed design
- Fits 8×6.5, 8×170 and 8×180 bolt patterns
Choosing by bolt pattern
A center cap’s job is to close the middle of the wheel, which helps keep dirt and moisture out of the hub area and gives the wheel a finished look. A screw-in cap is held by threads, so the thread condition matters: check for cross-threading or wear when fitting, and avoid forcing it. Because this cap is chosen by the wheel’s bolt pattern, measure or confirm the pattern on the wheel itself, not on the vehicle label, before buying.
Closed caps are sometimes preferred on wheels that see mud or gravel, since they shed debris more readily than open designs. Inspect caps during tire rotations for cracks, loose fit, or rust on the threads, and replace one that spins freely or wobbles. When a wheel is changed to a different bolt pattern, its center cap usually changes too, so keep the old cap aside until the new fit is confirmed.
Specifications
| Brand | Pro Comp Alloy Wheels |
|---|---|
| Part number | 603186500 |
| UPC | 844658016651 |
| Cap style | Screw-in |
| Open or closed | Closed |
| Bolt patterns | 8×6.5, 8×170 and 8×180 |
Vehicle fitment
No vehicle is named for this cap, so fit is set by the wheel. The wheel’s bolt pattern, 8×6.5, 8×170 or 8×180, is the deciding fact. Confirm the bolt pattern and center fit on the wheel before ordering.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
The screw-in center cap, part number 603186500. Not included: the wheel.









