Overview
The Pro Comp push thru center cap 1515016 is a closed cap from Pro Comp Alloy Wheels, with part number PXA1515016. It fits 8×6.5, 8×170 and 8×180 bolt patterns.
Measure the center bore on your wheel and confirm the bolt pattern before ordering.
Key features
- Push thru design
- Closed cap
- Fits three 8-lug bolt patterns
Push thru fit basics
A push thru cap is pressed into the center bore rather than threaded, so its fit depends on the bore diameter and the wheel face around it. A snug press keeps the cap from working out during driving, while a loose fit can rattle or fall out over rough ground. Before installing, clean the bore of grit and paint, then press the cap evenly with the palm of your hand or a rubber mallet to avoid bending its edge.
Closed caps are often chosen for a clean wheel face and to keep debris out of the hub area. Some owners carry a spare cap in the glovebox, since a lost cap is easy to overlook after a tire repair. Check the cap periodically for cracks, lifted edges or discoloration, especially after winter roads or gravel use, and replace any cap that no longer sits flush. Matching the cap to the wheel face, not to the vehicle, keeps the choice simple.
Specifications
| Brand | Pro Comp Alloy Wheels |
|---|---|
| Part number | 1515016 |
| UPC | 844658031517 |
| Type | Center cap, push thru |
| Open or closed | Closed |
| Bolt patterns | 8×6.5, 8×170 and 8×180 |
Vehicle fitment
Confirm the center bore and one of the 8-lug patterns on your wheel before ordering.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
One closed push thru center cap.












