Overview
The Pro Comp center cap 7425041 is a chrome two-part push thru cap with a 4.25 inch center bore. It is designed for Pro Comp wheels with part numbers ending in 83 and 85.
It is designed for 5×5.5 and 6×5.5 bolt patterns. Because the fit depends on the bore, bolt pattern and part number, check all three on your wheel before ordering.
Key features
- Chrome finish
- Two-part push thru design
- 4.25 inch center bore
- Matches wheel part numbers ending in 83 and 85
Two-part push thru design
A two-part push thru cap has an outer shell and an inner piece that work together to hold the cap in the bore. The inner piece typically pushes through the opening and locks behind the wheel, so the cap sits with its face flush to the wheel. This construction is common when a wheel has a larger bore and needs a secure, removable cover.
Chrome finishes look bright on new wheels but can show scratches or pitting from road grit and cleaning chemicals. Clean with a mild soap and a soft cloth, and avoid abrasive pads. Check the inner locking piece for bends or cracks each time the cap is removed, and replace the cap if it no longer holds firmly.
Specifications
| Brand | Pro Comp Alloy Wheels |
|---|---|
| Part number | 7425041 |
| UPC | 844658006034 |
| Type | Center cap, two-part push thru |
| Finish | Chrome |
| Center bore | 4.25 in |
| Bolt patterns | 5×5.5 and 6×5.5 |
Vehicle fitment
Confirm the 4.25 inch bore, the bolt pattern and the wheel part number before ordering.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
One two-part chrome push thru center cap.












