Overview
The Rugged Ridge 11235.18 is a 3/4-inch D-ring shackle rated to 9,500 lbs, made for vehicle recovery setups that use straps, snatch blocks and pulleys. Also called a D-shackle, it uses a screw-pin design to make temporary connections between recovery gear.
A D-ring is a standard piece of recovery equipment in a 4×4 kit. Rugged Ridge builds this 3/4-inch D-ring shackle from high-strength forged steel and finishes it in black powder coat. It is universal fit, so it is not tied to a specific year, make or model.
Key features
- Rated to 9,500 lbs
- Screw-pin design
- High-strength forged steel construction
- Black powder-coated finish
- Suitable for temporary connections of straps, snatch blocks and pulleys
- Designed for vehicle recovery in off-road conditions
Rating and load planning
Forged steel shackles are a common choice for recovery because forging gives the metal a dense, uniform grain structure. A rated shackle is only as useful as the rest of the rig, so think about each link: strap, rope, snatch block, anchor point and the shackle itself. Keep the total load within the rating, and remember that a sudden jerk can push the load well above what a steady pull produces.
Black powder coat protects the steel from some moisture and grime, but it can chip where the bow rubs against straps or metal edges. Touch up chipped areas with a rust-inhibiting paint once the shackle is clean and dry, and store it somewhere dry between trips. Check the screw pin for smooth turning and full seating before each use.
- Inspect the bow for bends and cracks
- Keep the screw pin clean and seated
- Replace shackles with worn or deformed bows
Specifications
| Brand | Rugged Ridge |
|---|---|
| Part number | 11235.18 |
| UPC | 804314290351 |
| Size | 3/4-inch |
| Rated capacity | 9,500 lbs |
| Pin type | Screw pin |
| Material | High-strength forged steel |
| Finish | Black powder-coated |
| Fitment | Universal fit |
Vehicle fitment
This shackle is universal fit and is not vehicle-specific. It is a recovery accessory that attaches to straps, snatch blocks and pulleys rather than a part sized for one vehicle.
Confirm the 9,500 lb rating suits the load and gear in your recovery setup. Confirm your vehicle’s year, model and trim before ordering.
What’s included
One 3/4-inch D-ring shackle with screw pin, part number 11235.18.
Not included: recovery straps, snatch blocks or pulleys.














