Overview
The ARB D-Shackle, part number ARB207B, is a zinc coated D-ring shackle from ARB 4×4 Accessories for vehicle recovery. It is the common connection between a recovery strap and the vehicle, rated for 7,000 lbs with universal fit.
Key features
- Rated for 7,000 lbs
- Zinc coated finish
- Half inch pin
- Sized 16 x 20mm
Matching strap and shackle
The shackle is only as useful as the strap and recovery point it connects. A strap rated well above the shackle is still limited by the shackle, so the lowest rating in the chain sets the real working limit. Choose a strap whose rating matches or stays below the shackle, and use a recovery point that is bolted to the frame rather than a bumper bracket. Off road, a shackle can be pulled at an angle, so the load on the pin may be higher than a straight pull suggests. Keep the pull as straight as the terrain allows.
Zinc coated hardware resists surface rust well in normal use, but scratches and salt exposure still wear the finish over time. Inspect the zinc for flaking, check the threads on the pin, and make sure the pin seats fully and locks in place. Replace a shackle that shows deformation, cracking or a pin that no longer turns smoothly. Ratings assume the shackle is in sound condition, so a worn one should not be trusted at its full rating.
Specifications
| Brand | ARB 4×4 Accessories |
|---|---|
| Part number | ARB207B |
| UPC | 70000250301 |
| Rating | 7,000 lbs |
| Size | 16 x 20mm |
| Pin | Half inch |
| Finish | Zinc coated |
| Fitment | Universal Fit |
Vehicle fitment
It is universal fit rather than vehicle-specific, and it suits vehicles from the smallest SUV to the largest heavy-duty trucks. Match the rating to your strap and recovery load.
Installation notes
Seat the pin fully and check the shackle for damage before each recovery. Keep the working load below the 7,000 lbs rating.
What’s included
The shackle is the only item described; no strap or other recovery gear is named.












