Select your vehicle

UTV Cages, Bumpers & Armor

UTV cages, bumpers and armor for side-by-sides. This category includes roll cage clamps and mounts, front and rear bumpers, skid plates and underbody armor, aluminum roofs, windshields and cage accessories. Brands include Axia Alloys, Pro Armor, Assault Industries and Advanced Accessory Concepts. Compare fitment and mounting details on each product page, then compare the products below.

Pro Armor Race front bumper for 900, XP 1000 and XP 4 1000 models

A side-by-side takes hits from rocks, stumps and rollovers that the factory plastic was never meant to absorb. This category covers the hard parts that protect the machine and the people in it: bumpers-bumpers-tire-carriers-winch-mounts-2 at both ends, belly skids and rock guards, cages, aluminum roofs and the clamps that hang gear from the tubes.

Cage clamps and mounts are the biggest group, sized by tube diameter and used for mirrors, GPS units, sound bars, helmets, headsets and jacks. Bumpers come next, from tube front bumpers-bumpers-tire-carriers-winch-mounts-2 to bolt-on LED bumper wings. Skid plates and rock guards cover the belly and the trailing arms. Roofs, intrusion bars and a shorty cage round out the overhead protection.

56Parts listed
11Brands
5Part types
30Cage clamps and mounts
1.25–3"Axia strap clamp sizes
1.75"Allied bumper tube

Shop UTV armor and cage parts

Popular UTV bumpers-bumpers-tire-carriers-winch-mounts-2 and armor

UTV clamp sizing and fitment

Cage clamps must match the tube's outside diameter. Measure each tube where the clamp will go, since one cage often mixes sizes.

Clamp sizes listed

Axia Alloys modular strap clamps1.25", 1.375", 1.5", 1.625"
Axia Alloys modular strap clamps, large1.75", 1.875", 2.375", 3"
Assault QuickFist multipurpose1.75" and 1.875" clamps
Assault Industries mirror clamp1.875"
Powerbass sound bar / pod clampsAdjustable

Fitment named in listings

  • Pro Armor Race front bumper: titled for 900, XP 1000 and XP 4 1000
  • Pro Armor front race skid plate: pairs with Pro Armor Race front bumpers
  • Allied 1003-BK front bumper: 2014–2019 RZR S, S4, XP and XP 4
  • Cognito 360-90621 rock guards: RZR XP Turbo with Cognito trailing arms
  • Rough Country 93044 bumper wings: 2013–2021 Polaris Ranger 1000
  • Pro Armor Asylum roofs: 2-seat and 4-seat, some with a light bar pocket

Tube size conversions

DecimalCircumference
1-1/2"1.5"About 4.71"
1-5/8"1.625"About 5.11"
1-3/4"1.75"About 5.50"
1-7/8"1.875"About 5.89"
2"2.0"About 6.28"
2-3/8"2.375"About 7.46"

Underbody armor materials

StrengthTrade-off
Aluminum plateGood for its weightDents and gouges on sharp rock
Steel plateHighest dent resistanceHeaviest option
UHMW plasticSlides over rock, resists crackingFlexes more than metal

Fitment changes between model years, trims and seat counts. Confirm the exact machine on the product page, and never drill or weld a factory cage.

All UTV Cages, Bumpers & Armor 56 parts

Showing 1–12 of 56 resultsSorted by popularity

Protecting a side-by-side

UTVs get driven hard in rocks, sand, ruts and trees, and the stock plastic and thin steel are not built for repeated impacts. Cages, bumpers-bumpers-tire-carriers-winch-mounts-2 and skid plates add protection and give you places to mount lights, radios, flags and other gear.

Cage parts and accessories

Roll cage clamps and mounts attach accessories to the cage tubing without drilling or welding. The clamp must match the tube outside diameter, so measure the tube before choosing, since sizes like 1.5, 1.75, 1.85 and 2.375 inches are common. Clamps come in fixed, adjustable and multi-purpose styles. Check the clamp material and whether it is anodized or coated for corrosion resistance.

  • Roofs: aluminum or composite roofs add overhead protection and shade.
  • Windshields: reduce wind and debris, and some are vented or fold down.
  • Jack and tool mounts: keep recovery tools in reach and secured.

Bumpers and guards

Front bumpers-bumpers-tire-carriers-winch-mounts-2 protect the radiator, lights and bodywork and may include light mounts or winch plates, while rear bumpers-bumpers-tire-carriers-winch-mounts-2 protect tail lights and often include tow points. Compare tubing diameter, wall thickness, finish, weight and whether it works with factory bumper brackets. Some bumpers-bumpers-tire-carriers-winch-mounts-2 are sold separately from skid plates and other armor, so verify what is included.

Skid plates and underbody armor

Skid plates guard the belly, A-arms and drivetrain. Aluminum plates offer a good balance of weight and strength, and thicker plates resist denting better but add weight. Look for designs that allow access for service and that fit your particular model and year.

Installation and safety

Bolt-on parts should be installed with the specified hardware and checked for tightness after the first ride. Do not weld, drill or modify a factory roll cage unless the manufacturer says it is acceptable, because that can weaken it. An accessory clamp is not a structural part of the cage. Fit varies between models, years and seat counts, so confirm fitment with the manufacturer's specifications, and check any rules for your riding area.

Building around a roll cage

Many UTV owners start with a cage and then add accessories gradually. Before buying clamps and mounts, plan what will go where: a roof, a windshield, a light bar, a radio, a jack, a flag and perhaps a fire extinguisher. Spread the weight and keep heavy items low and close to the center. Check tube sizes at each location, since cages often use different diameters in different places. Consider how accessories affect visibility, how they could snag brush or branches, and how each mounts if the machine rolls. Keep wiring neat and protected from rubbing and heat, and use proper connectors rather than twisted splices. After each ride, check clamp bolts for looseness, because vibration can loosen hardware over time, and replace any corroded or damaged hardware immediately.

Common mistakes include buying clamps without measuring the tube, over-tightening aluminum hardware so it strips or cracks, and mounting heavy accessories on a single clamp. Use the torque the manufacturer lists, add thread locker where recommended, and spread loads across several mounting points.

Popular UTV Cages, Bumpers & Armor brands

UTV Cages, Bumpers & Armor FAQ

How do I choose the right cage clamp size?

Measure the outside diameter of the cage tube and pick a clamp made for that size. A loose fit can slip or damage the tube. Adjustable and multi-size clamps exist, so check the stated size range.

Can I drill into my UTV cage to mount accessories?

It is generally best not to. Drilling or welding can weaken a roll cage. Clamp-on mounts avoid that, and a manufacturer's instructions should tell you what changes are acceptable for your model.

Do UTV bumpers affect handling?

A heavier bumper adds weight to the front or rear and can slightly change handling and suspension behavior. Aluminum and thin-wall designs keep weight down. Check the listed weight and your machine's limits.

Are skid plates worth it for a UTV?

For riding in rocks, stumps or rough terrain, they protect components that can be costly to fix, such as the belly pan and control arms. For easy trails, you may need less, so consider where you ride.