Overview
The Power Stop K4640 is a front Z23 Evolution Sport brake kit for the 2006–2007 Mercedes-Benz ML500, with drilled and slotted rotors and carbon fiber infused ceramic pads.
This is a performance upgrade. The slotted face cleans the pad surface, and the drilled holes reduce rotor weight. The Z23 Evolution Sport line balances performance with everyday manners, using carbon fiber infused ceramic pads that run quiet and clean. The kit provides more pad bite than many other brands without added noise or dust. Drilled rotors also improve the appearance of the wheels.
Key features
- Drilled and slotted Evolution performance rotors
- Z23 Evolution Sport carbon fiber infused ceramic brake pads
- Premium hardware included
- Pin bushing and hi-temp lubricant included
- Slots help increase pad bite and air circulation
- Drilled holes and slots give debris, dust, gases and water a path to escape
- Slots clean and de-glaze the pad surface
- Drilled rotors reduce rotor weight and improve the look behind the wheel
Bedding in new pads
New pads and rotors work best after a bedding procedure that transfers an even layer of friction material onto the rotor surface. Make a series of moderate stops from city speeds, letting the brakes cool between runs, rather than one hard stop from highway speed. Ceramic compounds usually need this step less than some semi-metallic pads, but it still improves the first stretch of driving.
Because the ML500 is a heavy vehicle, the front brakes do most of the work under hard deceleration. Check the brake fluid level after the job, and make sure the caliper slide pins move freely before the wheels go back on. A squeal or grab that does not settle after several stops is a reason to recheck the installation.
- Bed in pads with progressive stops
- Let rotors cool between hard runs
- Clean oil from the rotor face before installing
- Lubricate caliper slide pins only where the manual allows
Specifications
| Brand | Power Stop |
|---|---|
| Part number | K4640 |
| UPC | 700007474281 |
| Brake position | Front |
| Rotor type | Evolution drilled and slotted |
| Brake pads | Z23 Evolution Sport carbon fiber infused ceramic |
| Hardware | Premium hardware, pin bushing and hi-temp lubricant |
| Fit type | Direct fit |
Vehicle fitment
The K4640 front kit fits the 2006–2007 Mercedes-Benz ML500.
Other ML models such as the ML350 or ML550, and other years of the ML500, are not covered by this part number. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The kit includes premium hardware, a pin bushing and hi-temp lubricant, and it is a direct fit. Replace both sides of the axle together so left and right braking match.
What’s included
Drilled and slotted rotors, Z23 Evolution Sport ceramic pads, premium hardware, and a pin bushing with hi-temp lubricant.
Not included: Brake lines are not included in the kit.









