Overview
The Weigh Safe Hitches WS4-2 is an adjustable ball mount with a 4in. drop and 2 inch shank, fitted with a built-in scale that measures tongue weight. Pressure on the ball sends a reading to the scale, which helps you confirm the load is balanced before you tow. It is a polished forged aluminum hitch and a universal fit, so it is not matched to one specific make, model or year.
Tongue weight matters for safe towing. Tongue weight should be no less than 10 percent of gross trailer weight and no more than 15 percent. For a 10,000 pound trailer, that means tongue weight of no less than 1000lbs. and no more than 1500lbs. The WS4-2 is certified to V5 and J684 standards and carries a 1500 LBS max tongue rating.
Key features
- Built-in scale reads tongue weight in lbs.
- Adjustable from 5in. rise to 4in. drop in 2in. increments
- Includes both 2in. and 2-5/16in. stainless steel balls
- 10,000 LBS max GTW with the 2-5/16in. ball; 8000 LBS GTW with the 2in. ball
- 1500 LBS max tongue
- V5 and J684 certified
- Forged aluminum for light weight
Choosing your drop height
Drop and rise decide how level a trailer sits behind the tow vehicle. A mount that drops too far can leave the trailer nose low, while one set too high can lift the front and reduce control. Before choosing a setting, measure your hitch height with the trailer uncoupled and compare it with the trailer’s coupler height. Small changes in height are easy to make with an adjustable mount, so re-check the level after each change.
Because the scale reads the load on the ball, height also affects the reading. Keep the setting the same for every tow so the tongue weight numbers stay comparable from trip to trip. Shocks, springs, and tire pressure can all shift the stance of a loaded vehicle, so recheck the level when those change too.
Specifications
| Brand | Weigh Safe Hitches |
|---|---|
| Part number | WS4-2 |
| UPC | 653863201420 |
| Type | Adjustable ball mount with built-in scale |
| Drop or rise | Adjustable from 5in. rise to 4in. drop in 2in. increments |
| Shank size | 2 inch |
| Material | Forged aluminum |
| Finish | Polished |
| Balls | 2in. and 2-5/16in. stainless steel |
| Max GTW | 10,000 LBS with 2-5/16in. ball; 8000 LBS GTW with 2in. ball |
| Max tongue weight | 1500 LBS |
| Certifications | V5 and J684 |
Vehicle fitment
It is a universal fit and is not tied to a particular make, model or year. Fitment depends on your receiver and tow vehicle, so confirm the GTW and tongue weight limits against your trailer before towing.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The scale reads tongue weight when pressure is on the ball, so set the drop or rise before you hook up the trailer and keep your measurements consistent for each tow. Stay within the 1500 LBS max tongue rating and the GTW rating for the ball you use.
What’s included
The ball mount with both 2in. and 2-5/16in. stainless steel balls.














