Overview
The Warn Replacement Wire Rope, model 61950, is a 7/16 inch by 90 foot length of galvanized aircraft steel wire rope for replacing damaged cable. It is universal fit and not tied to a specific vehicle.
Warn’s wording is that damaged rope has to be swapped out before a winch is safe to run. The rope has a swaged loop for a hook on one end and a wire rope terminal on the other end, and galvanizing helps it resist corrosion.
Key features
- Galvanized aircraft steel wire rope
- 7/16 inch x 90 feet long
- Swaged loop for a hook on one end
- Wire rope terminal on the other end
Hook and loop considerations
The swaged loop at one end is the connection point that takes the most load during a pull. Its fit onto the hook or shackle should be snug without forcing, and the loop should sit straight rather than twisted. A loop that is hard to seat often means the attachment is the wrong size for the rope.
The wire rope terminal on the other end anchors the line to the drum. Check the terminal for loose wires and corrosion each time the line is inspected, because a weak terminal can fail before the cable itself. Pairing the rope with a rated hook and fresh attachment hardware gives the setup a consistent working load.
- Confirm the loop seats fully on the hook
- Keep the loop free of kinks and twists
- Inspect the terminal for loose wires
- Replace worn shackles and hooks alongside the rope
Specifications
| Brand | Warn |
|---|---|
| Model number | 61950 |
| UPC | 1274861950 |
| Material | Galvanized aircraft steel wire rope |
| Size | 7/16 inch |
| Length | 90 feet |
| Ends | Swaged loop for a hook and wire rope terminal |
Vehicle fitment
Winch rope like this is not a vehicle-specific part, so fit depends on the winch and drum rather than a vehicle.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Fit the rope with the winch disengaged and the drum clear, then run it out slowly under light load. Do not run the winch on rope that shows damage.
What’s included
Replacement wire rope with a swaged loop for a hook on one end and a wire rope terminal on the other.
Not included: the winch and any hook you attach.









