Overview
The Warn Wire Rope Assembly, part number 74313, is a 3/8 inch by 80 foot wire rope assembly for Warn winches. It is a universal fit assembly, so it is not tied to a specific vehicle.
When ordering a Warn winch part, Warn asks for the model number, battery voltage and serial number. On planetary gear models the serial number is on the gear end housing, and on upright, spur gear models (M8274) it is on the top of the winch housing.
Choosing and inspecting wire rope
Wire rope is the working line of a winch, so its condition matters as much as its size. Diameter and length should match the winch’s drum capacity and the spooling pattern it was designed for. Mismatched rope can wind unevenly, which stresses the drum flanges and the fairlead.
Inspect wire rope regularly. Look for broken wires, kinks, flattened sections and corrosion, especially near the end fittings. Rope that has been run over a sharp edge or spooled under heavy load should be checked closely. Keep the rope clean, dry and lightly lubricated when stored.
Wire rope often gets replaced together with the fairlead and hook, since worn guides can damage a new line quickly. Check those parts at the same time.
- Confirm the rope length suits the winch drum
- Check the fairlead for wear before reinstalling
- Inspect the hook and end fitting for damage
Specifications
| Brand | Warn |
|---|---|
| Part number | 74313 |
| UPC | 12748743132 |
| Size | 3/8 inch by 80 feet |
| Type | Wire rope assembly |
Vehicle fitment
Universal fit: this wire rope assembly is not vehicle-specific, and no vehicle years, makes or models are named.
Confirm your vehicle’s year, model and trim before ordering. Confirm your winch model, battery voltage and serial number as well.
What’s included
Only the wire rope assembly is included. Hardware and other winch parts are not part of this item.









