Select your vehicle

Warn Wire Rope for M6000 Winch (Wire) – 15276

Warn

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Warn wire rope for the M6000 winch, part number 15276
  • 80 ft galvanized aircraft wire rope, 5/16 in (8mm)
  • Swaged loop on one end, wire rope terminal on the other
  • Universal fit for the M6000 winch

Description

Overview

The Warn Wire Rope for M6000 Winch, part number 15276, is an 80 ft galvanized aircraft wire rope with a diameter of 5/16 in (8mm). It is made for the M6000 winch.

Warn says damaged wire rope must be replaced to safely operate a winch, and this rope is offered as that replacement.

Key features

  • Aircraft wire rope construction
  • Galvanized to help resist corrosion
  • Swaged loop on one end
  • Wire rope terminal on the other end
  • 80 ft length

Wire rope care and handling

Wire rope fails differently from synthetic line. Broken wires, kinks and flattened sections are the common warning signs, and a rope with any of them should come off the winch. Galvanizing helps resist corrosion, but it does not stop abrasion, so keep the rope off sharp rocks and check the coating for flaking after salt or mud exposure.

Spooling matters as much as the rope itself. Keep tension on the rope while winding it onto the drum so the layers stack neatly, since loose wraps can pinch and wear the wire. Gloves protect your hands from broken wire ends, which can catch on skin when handling an old rope.

Inspect the swaged loop and the wire rope terminal at each end, since fittings carry the load and are a common place for fatigue to start. Replace a worn rope before it is needed for a recovery. After replacement, cycle the winch slowly to confirm the rope spools evenly.

Specifications

Brand Warn
Part number 15276
UPC 12748152767
Length 80 ft (24m)
Diameter 5/16 in (8mm)
Material Aircraft wire rope, galvanized
Ends Swaged loop on one end, wire rope terminal on the other

Vehicle fitment

The rope is a universal fit and is designed for the M6000 winch. It is a winch part rather than a vehicle part, so check the diameter and length against your winch’s requirements.

Installation notes

Replace damaged wire rope before operating the winch, as Warn advises.

What’s included

  • 80 ft wire rope
  • Swaged loop on one end
  • Wire rope terminal on the other end

Not included: the M6000 winch.

SKU: WAR15276 Category:

Specification

Shipping weight 13.00 lbs
Package dimensions 22.00 × 22.00 × 2.00 in
brands

Questions & Answers

Is this Warn wire rope for the M6000 winch?

It is made for the M6000 winch. The rope is 5/16 in (8mm) in diameter and 80 ft long, so check those dimensions against your winch's requirements before ordering.

What are the ends of the wire rope like?

One end has a swaged loop and the other has a wire rope terminal. The rope is galvanized to help resist corrosion and is made from aircraft wire rope.

What is the part number and UPC?

The part number is 15276 and the UPC is 12748152767. The rope is 80 ft long, which is 24m in metric measure.

How do I tell when a wire rope needs replacing?

Replace the rope when it shows broken wires, deep kinks, flattened strands, heavy corrosion or damaged end fittings. Inspect it before each use, and do not run a rope that shows any of these signs, since it may fail under load.

Should the swaged loop end be checked during installation?

Yes. Confirm the swaged loop and terminal are secure and seated correctly before the winch is loaded. Check that the connection at the loop fits your recovery gear, and inspect both ends again after the first few pulls.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon