Overview
The Warn Receiver Shackle Bracket, part number 29312, combines a heavy-duty receiver bracket with a shackle, so a Class III receiver hitch can serve as an off-road recovery point. It has a 9500 lb working load limit (WLL).
It fits all standard Class III hitches with a 2-inch receiver. The bracket is not tied to a specific vehicle, so the receiver hitch on your vehicle decides whether it is the right match.
Key features
- Heavy-duty receiver bracket combined with a shackle
- 3/4 inch and 20mm shackle
- 9500 lb working load limit (WLL)
- Uses a standard Class III receiver hitch as a recovery point
- Fits Class III hitches with a 2-inch receiver
Recovery point setup
A receiver shackle bracket turns the receiver into a fixed recovery point, so the hitch and its class matter as much as the bracket. Confirm the receiver opening and class before attaching anything, and keep the bracket seated fully so it does not move under load. Loads should stay inside the working load limit, and sudden shock loads should be avoided where possible. Use the bracket for recovery pulls, and keep everyday towing on a hitch rated for that job.
Look over the bracket and shackle after each use. Check for bent metal, cracked welds, worn pin holes, and any play where the bracket meets the receiver. Clean mud from the shackle and confirm its pin is seated and secured. A receiver that shows rust or enlarged holes should be repaired before using the bracket. Keeping the connection tight and inspected helps the recovery point work the way it should.
- Keep loads within the working load limit
- Check the bracket for cracks and bent metal
- Seat the shackle pin fully before pulling
Specifications
| Brand | Warn |
|---|---|
| Part number | 29312 |
| UPC | 12748293125 |
| Working load limit | 9500 lb (WLL) |
| Shackle size | 3/4 inch and 20mm |
| Receiver class | Class III |
| Receiver size | 2-inch |
Vehicle fitment
No vehicle is listed, and the bracket is not sized for a specific model. Its fit depends on a standard Class III receiver hitch, so check your receiver class before using it.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Confirm the receiver is a standard Class III size with a 2-inch opening before attaching the bracket. Keep loads within the 9500 lb working load limit.
What’s included
The bracket comes combined with a shackle. A receiver hitch is not included.
Not included: receiver hitch.












