Overview
The Warn 6126 is a retaining ring for Warn Truck and Jeep winches. It is identified by part number 6126 and UPC 12748061267. A retaining ring is a snap-in ring that keeps a component seated inside an assembly.
The ring is matched to the winch rather than a vehicle, so the winch model decides whether it fits.
Key features
- Retaining ring for Warn Truck and Jeep winches
- Brand Warn, part number 6126
- UPC 12748061267
- Universal fit: matched by winch model, not by vehicle
Before you rebuild a winch
A retaining ring holds a gear, bearing or cover in place inside a winch housing. It keeps other parts seated rather than carrying load itself. When a winch is opened for service, rings are often removed to reach the gears behind them. Those removed rings should be inspected before reuse, since a ring that has been pried or stretched may not sit squarely in its groove.
Retaining rings are usually installed with snap ring pliers matched to the ring type. Using the wrong tool can bend the ring or scratch the groove, which can lead to a loose part and gear noise. Keep the ring and its groove clean, and check that the ring sits fully in the groove before reassembly.
- Inspect the groove for burrs or wear
- Replace any ring that is bent or deformed
- Keep parts in order to match gears during reassembly
Specifications
| Brand | Warn |
|---|---|
| Part number | 6126 |
| UPC | 12748061267 |
| Component | Retaining ring |
Vehicle fitment
No vehicle is named for this ring. Use the winch model, not a vehicle, to decide whether this ring is correct.
Confirm the winch model and serial number before ordering.
Installation notes
Upright spur gear models (M8274) carry the serial number on the top of the winch housing. Planetary models carry it on the gear end housing, so locate it before comparing rings.
What’s included
Only the retaining ring is described.
Not included: The winch and its gears are not part of this item.









