Overview
The Warn 15603 is a 1/4-20 socket head capscrew, 3 inches long, offered for Warn winch replacement work. The socket head is driven with a hex key, which distinguishes it from a hex head bolt.
It is universal fit, so the thread size and length decide the match. Compare both with the fastener you are replacing before ordering.
Fastener care and torque
Socket head capscrews rely on full engagement of the hex key, so a worn or undersized key can round the socket and make removal difficult later. Keep the socket clean of grit and old thread compound before inserting the screw, and avoid forcing a screw that resists at the start of the thread. A screw that binds early may be cross-threaded, or the hole may be damaged.
On a winch, the fastener’s job is to hold a component under repeated load and vibration, so the thread must seat cleanly and the head must stay intact. Inspect screws during service for stretched shanks, galled threads, and heads that have begun to round. Replace any damaged fastener with one of the same thread size and length rather than substituting a shorter or longer screw.
- Seat the hex key fully before turning
- Inspect threads for galling before reuse
- Replace any screw with a rounded head
Specifications
| Brand | Warn |
|---|---|
| Part number | 15603 |
| UPC | 1274815603 |
| Thread size | 1/4-20 |
| Length | 3 in |
| Head style | Socket head, hex key drive |
| Fitment | Universal fit |
Vehicle fitment
No vehicle is named for this fastener. Its Universal Fit label means it is not tied to one model.
Match the thread and length to the bolt you are replacing. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Seat the hex key fully in the socket to avoid rounding the head, and check the torque requirement in the winch documentation before tightening.
What’s included
The entry covers the Warn socket head capscrew, 1/4-20 by 3 in, part number 15603. No other hardware is listed.









