Overview
The Vertically Driven Products Stubby Bumper End Caps, part number 31550, are stubby off-road end caps for the factory OE bumper on a JK Wrangler (2007-2018). They come as a pair and are made in the USA.
The end caps give the bumper a rugged look and add tire clearance. The do-it-yourself kit reduces bumper width by 17.5 for custom looks and better approach angles, and includes instructions on cutting along with all the necessary fasteners.
The end caps are made from 3/16″ roto molded plastic with a matching textured finish. They fit the factory OE bumper only. The short description lists 2 and 4-door models.
Key features
- Stubby off-road end caps for the factory OE bumper
- Adds more tire clearance
- Reduces bumper width by 17.5 for better approach angles
- 3/16″ roto molded plastic with textured finish
- Supplied as a pair
- Includes instructions and all necessary fasteners
- Made in the USA
Before cutting the bumper
Cutting a factory bumper changes how it carries load and where it sits relative to the body. Before making any cut, mark the planned line, check it against the mounting points, and confirm that lights, sensors and tow hardware still clear once the caps are installed. Keep the bumper supported so trimmed material does not drop or pull on the mounts.
Plastic end caps are often replaced after rock strikes or after a bumper has been cut and refit several times. Look for cracked plastic at the fastener points, loose hardware or rubbing against tires, and recheck bumper alignment after any hard impact. Fresh fasteners are a common addition when the old ones have stretched or corroded.
- Mark the cut line before starting
- Check tire and steering clearance at full lock
- Keep sensors and wiring away from the cut edge
- Replace cracked or rounded fasteners
Specifications
| Brand | Vertically Driven Products |
|---|---|
| Part number | 31550 |
| UPC | 789214315505 |
| Product type | Stubby bumper end caps |
| Material | 3/16″ roto molded plastic |
| Finish | Matching textured finish |
| Location | Front |
| Bumper type | Factory style |
| Quantity | Pair |
| Body styles | 2 and 4-door models |
| Origin | Made in USA |
Vehicle fitment
The 31550 is for the Jeep Wrangler JK (2007-2018). It fits the factory OE bumper only.
Fit is limited to the factory OE bumper, so other Wrangler generations such as the TJ or JL and aftermarket bumpers are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
End caps are small, but the bumper they attach to is heavy, so keep the vehicle supported and have someone steady the bumper while you work.
- Torque each fastener to the correct value for the hardware used.
- Verify clearance around the tires, body, exhaust and wiring before tightening fully.
- Go over the fasteners again after the first drive, then after off-road use.
- Ask a professional if the install requires drilling, cutting or welding.
What’s included
- Pair of end caps
- Instructions on cutting
- All necessary fasteners









