Overview
The Crown Automotive 52000488 is a front passenger-side bumper bracket for the 1984–1996 Jeep Cherokee XJ and the 1986–1992 Jeep Comanche. It is a direct-fit bracket for the front right corner of the bumper.
The bracket comes primed to resist rust. It must be primed again before paint is applied, so the paint goes over that primer.
Key features
- Passenger-side front position
- Primed for rust inhibition
- Direct fit for the Cherokee XJ and Comanche
- Covers two chassis across 1984–1996
Priming and paint prep
A bare steel bracket rusts quickly once the bumper is removed and exposed to road salt and moisture. Because the bracket is supplied primed, the first job is to keep that coating intact during handling and fitting. Scratches from bolts or a floor jack should be touched up with a compatible primer before the bracket goes on the vehicle.
If the bracket is going to be painted to match the bumper, scuff the primer lightly, wipe the surface clean and use a primer that suits both steel and the topcoat. Paint over bare spots will peel, and a fresh coat applied over dirt or oil will show defects later. Let each coat cure fully before fitting the bracket and tightening the mounting bolts.
- Handle the bracket by its edges to protect the primer
- Touch up any scratches before installation
- Degrease the surface before applying paint
- Check that the bolt holes are clear of paint
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | 52000488 |
| UPC | 848399012347 |
| Location | Front |
| Position | Front right (passenger side) |
| Finish | Primed |
| Fitment type | Direct fit |
Vehicle fitment
Fits the 1984–1996 Jeep Cherokee XJ, including the Base, Briarwood, Chief, Classic, Country, Laredo, Limited, Pioneer, SE and Sport trims, and the 1986–1992 Jeep Comanche in its Base, Chief, Custom, Eliminator, Laredo, Pioneer, X and XLS trims.
This bracket is made for the front passenger-side position. Confirm fit for your vehicle’s year, model and trim before ordering, since the driver-side front position needs a separate bracket.
What’s included
One primed front passenger-side bumper bracket.


















