Overview
The Rough Country 1043 is a brake pump relocation bracket for the 2012–2018 Jeep Wrangler (JK), in 2-door and 4-door models. The bracket moves the brake pump canister on the frame rail, which makes room for a Rough Country front bumper to be installed.
The bracket is needed on JK models that install the Rough Country front winch bumper, item 1054, or the front hybrid stubby bumpers, items 1059 and 1062.
Key features
- Relocates the brake pump canister on the frame rail
- Required for Rough Country front winch and hybrid stubby bumper installs on JK models
- Steel construction with a black finish
- It mounts with bolts.
Before you buy
A brake pump relocation bracket is a small part with a large effect on the brake system. Moving the canister changes the length of the lines that run to it, and those lines must reach without strain through the full range of suspension travel. Look over the lines, hoses and mounting points before and after the move, and make sure nothing rubs against the frame or the new bumper.
If a winch or hybrid stubby bumper is planned, think about the whole front end at the same time. Wiring for a winch, mounting hardware and bumper brackets are often replaced or added in the same job. Keep brake fluid at the correct level once the work is done, and bleed the system if any line was opened. A brake check after a few trail runs is a sensible habit after any front-end change.
- Check brake lines for strain at full suspension travel
- Verify brake fluid level after the work
- Plan winch wiring and bumper hardware together
- Bleed the brakes if any line was opened
Specifications
| Brand | Rough Country |
|---|---|
| Part number | R/C1043 |
| Material | Steel |
| Finish | Black |
| Required with | Rough Country front bumpers 1054, 1059 and 1062 |
Vehicle fitment
The fitment data covers the 2012–2018 Jeep Wrangler (JK), 2-door and 4-door models, in the 75th Anniversary, Rubicon, Sahara, Sport and Sport S versions and the Unlimited versions of those.
Wrangler JK models from 2007 to 2011 and the 2018 and later JL are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Installation is a bolt-on job. Because the bracket moves the brake pump canister, it must be in place before a front winch or hybrid stubby bumper is fitted on a JK. Have a qualified installer check the brake system after the canister is moved.









