Overview
The Tuffy Ram Rear Split-Bench Underseat Storage Security Lid, part number 312-01, is a heavy duty locking lid that replaces the plastic OEM folding platform in the hidden underseat compartment of listed Ram pickups. It is built for securing valuable tools and gear.
The lid is made of 16 gauge and 1/8 inch thick welded steel. It features Tuffy’s Pry-Guard locking system with 1/8 inch thick steel components and a continuous welded steel hinge, and it gives a sturdier deck surface for items placed on top. It is low profile and thinner than the factory plastic solution.
Key features
- Pry-Guard locking system with 1/8 inch steel components
- 10-tumbler, double bitted security lock with built-in weather seals
- 11 gauge mount plate with integral lock bracket
- 16 gauge flanged lid with all fastening hardware included
- Continuous welded steel hinge
- Durable powder coat finish
- Low profile, thinner than the factory plastic folding platform
- Mounting points secured within the enclosure
- Multiple bumpers to reduce rattling
- Installs without drilling or permanent vehicle modifications
Keeping underseat storage secure
Underseat compartments are convenient but often overlooked when it comes to security. A steel lid like this one keeps tools and gear out of sight and makes prying harder, but a lock is only as useful as its upkeep. Check the lock cylinder and seals now and then, and keep the cylinder free of road grit with a dry graphite lubricant rather than oil, which collects dust.
Rattles usually come from bumpers that have compressed or from a lid sitting loose on its mount. Inspect the rubber bumpers after rough trips and replace any that have flattened. Look over the welds and the hinge occasionally, and touch up chipped powder coat before rust starts. Keep heavy loads centered on the deck so the lid is not stressed on one side.
- Tighten mount hardware after the first few drives
- Clean grit from the hinge pivot
- Store spare keys away from the vehicle
Specifications
| Brand | Tuffy |
|---|---|
| Part number | 312-01 |
| UPC | 700007203001 |
| Lid | 16 gauge flanged steel, 1/8 inch thick welded steel |
| Mount plate | 11 gauge steel with integral lock bracket |
| Lock | 10-tumbler, double bitted, built-in weather seals |
| Hinge | Continuous welded steel |
| Finish | Durable powder coat |
| Installation | Standard hand tools, no drilling |
| Requires | Removal of OEM folding platform |
Vehicle fitment
The manufacturer fitment list covers the 2009 to 2010 Dodge Ram 1500, 2500 and 3500, and the 2011 to 2016 Ram 1500, 2500 and 3500, across the trims named in that list, including Laramie, SLT, Big Horn, Tradesman and Power Wagon.
It fits 2009 to 2010 and 2011 to 2016 Dodge Ram 1500, 2500 and 3500 models, across trims including Laramie, SLT, Big Horn, Tradesman and Power Wagon. Model years outside those ranges are not covered, so newer Ram generations are excluded. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
The OEM folding platform must be removed before this lid is installed, because the lid replaces it. Installation uses standard hand tools and takes a few minutes. Keep fingers clear of the hinge and steel edges while lifting the lid into place.
What’s included
The kit includes the steel lid, the 11 gauge mount plate with integral lock bracket, the lock and all fastening hardware.
Not included: the factory plastic folding platform, which must be removed.









