Overview
The Tuffy 248-01 Conceal Carry Security Drawer is a 16 gauge steel under-seat lockbox for Jeep Wrangler TJ and LJ models without a flip seat. It mounts under the drivers side seat, so valuables can be stored out of sight in a lockable compartment.
Tuffy describes over 336 cubic inches of lockable storage in a formfitting enclosure. The drawer opens and closes on smooth ball bearing slides with a pull lever, and it is secured by a 10 tumbler double bitted lock. Tuffy’s Pry-Guard locking system and a formed rib in the enclosure work together to strengthen the lock. Because it uses the factory hardware, the standard mount does not require drilling. Tuffy manufactures the drawer in the USA.
Key features
- Built for Jeep Wrangler TJ and LJ models without a flip seat
- Over 336 cubic inches of lockable storage
- Pry-Guard locking system with a 10 tumbler double bitted security lock
- Built-in weather seals in the lock design
- Heavy duty fully extending slide system with a pull lever
- Welded 16 gauge steel construction with a formed rib in the enclosure
- Factory hardware mount without drilling
- Black finish
Fitting around the seat
Underseat drawers for TJ and LJ Wrangler models share a basic trade-off: the storage sits where the seat base and floor meet, so space is tight. Before buying, measure the area under the driver’s seat with the seat fully back and fully forward. Check that the seat moves freely once the drawer is in place and that the seat belt buckle and wiring still clear the enclosure.
Interior clearance is limited, so keep small valuables in the drawer and avoid packing it to the top. The pull lever and slides work best when the contents are balanced and not pressed against the lid. Clean the slide tracks now and then and keep grit out of the lock, which keeps opening smooth over years of use.
- Measure seat travel before installing
- Keep wiring and seat belt buckles clear
- Load small items evenly
- Clean slide tracks periodically
Specifications
| Brand | Tuffy |
|---|---|
| Part number | 248-01 |
| UPC | 70000539118 |
| Material | 16 gauge steel, welded construction |
| Finish | Black |
| Flip seat | Without flip seat |
| Storage capacity | Over 336 cubic inches |
| Exterior dimensions | 17-1/4 inch L x 8-1/4 inch W x 3-3/16 inch H |
| Interior dimensions | 16-13/16 inch L x 7 inch W x 2-7/8 inch H |
| Latch bracket clearance | 2-1/16 inch |
| Lock | 10 tumbler double bitted, Pry-Guard locking system |
| Mounting | Under drivers side seat, factory hardware |
Vehicle fitment
It is written for Jeep Wrangler TJ and LJ models in versions without a flip seat, meaning the Wrangler (TJ) and Wrangler (LJ) chassis.
Other Wrangler generations and versions with a flip seat are not covered. Match your year, model and trim before placing the order.
Installation notes
The drawer mounts under the drivers side seat using the factory hardware, so the standard installation does not require drilling. The drawer must stay locked while the vehicle is being driven.
What’s included
The security drawer with its 10 tumbler double bitted lock and pull lever.
Not included: the factory mounting hardware, which the standard installation uses.
















