Overview
The Tuffy 247-01 Conceal Carry Security Drawer is an under-seat lockbox for the 2007–2018 Jeep Wrangler JK. It mounts under the drivers side seat and gives you a concealed, lockable compartment that keeps valuables out of sight. It is a direct fit for the Unlimited trims in the fitment section below.
The enclosure is built from 16 gauge steel with welded construction and a black powder coat finish, and it offers over 324 cubic inches of lockable storage. The drawer runs on smooth ball bearing slides and opens with a pull lever. It is secured by a 10 tumbler double bitted lock, and a formed rib in the enclosure strengthens the locking system.
Key features
- Pry-Guard locking system with a 10 tumbler double bitted security lock
- Built-in weather seals on the lock and a weather and dust seal on the drawer
- Heavy-duty fully extending ball bearing slide system with a pull lever
- Welded 16 gauge steel construction with a formed rib in the enclosure
- Mounts under the drivers side seat on the factory hardware, with no drilling for the standard install
- Optional security hardware is included and requires drilling one hole
- Over 324 cubic inches of lockable storage
- Black powder coat finish
Before you drill
A concealed drawer is only as strong as its mount and lock, so the install method deserves attention. The standard setup relies on factory hardware and avoids drilling, which keeps the seat frame unchanged. If you use the optional security hardware, plan the hole location carefully and check for wiring, brake lines and fuel lines behind the seat before drilling.
Over time, look at the slides, the pull lever and the lock cylinder. A slide that binds or a lever that feels loose usually means the mount or fasteners need attention. Keep the lock clean and dry, and avoid forcing a stuck drawer. Steel with a black powder coat resists everyday wear, but chips in the finish should be touched up to limit surface rust.
- Use a drill bit sized for the hardware before drilling
- Check for wiring and lines behind the seat first
- Tighten mounting fasteners after the first few drives
- Touch up chipped powder coat promptly
Specifications
| Brand | Tuffy |
|---|---|
| Part number | 247-01 |
| UPC | 70000536601 |
| Material | 16 gauge steel, welded construction |
| Finish | Black powder coat |
| Storage capacity | Over 324 cubic inches |
| Interior dimensions | 17 inch L x 6.5 inch W x 3-5/16 inch H |
| Lock | 10 tumbler double bitted, Pry-Guard locking system |
| Mounting | Under drivers side seat, factory hardware |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2007–2018 Jeep Wrangler (JK) Unlimited trims 70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S and X.
It covers 4-door Unlimited trims only, so 2-door Wrangler JK models and earlier generations such as the TJ or LJ are not covered. Make sure your year, model and trim match the fit coverage before buying.
Installation notes
The standard mount uses the factory hardware without drilling. The optional security hardware included with the drawer requires drilling one hole. The drawer must stay locked while the vehicle is being driven.
What’s included
The security drawer with its Pry-Guard locking system and 10 tumbler double bitted lock, plus the optional security hardware noted above.
















