Overview
The Tuffy 130-01 is a full length underseat drawer for CJ7, YJ and TJ Wrangler models. It uses the floor from under the front of the rear OEM factory seat to the tailgate and provides 2520 cubic inches of storage without losing the rear seat.
The drawer is made of 16 gauge steel with a patented Pry-Guard II locking system and a 1/4 inch steel latch. A separate mounting kit is required for each application.
Key features
- Full length drawer running from under the rear OEM seat to the tailgate
- 2520 cubic inches of storage space
- Patented Pry-Guard II locking system with a 1/4 inch steel latch
- Keeps the OEM factory rear seat in place
Full-length drawer considerations
A full-length underseat drawer takes up a large part of the cab floor, so its effect on weight distribution is worth planning. Load heavier gear toward the front of the drawer and keep the rear over the axle line in mind, especially with a full load on the trail. Because the drawer runs under the rear seat, check that the seat still latches and folds as expected after installation.
Steel floor drawers can collect moisture, so seals and drain points deserve regular attention. Keep the tailgate seal and latch clean and free of grit. If you carry muddy gear, rinse it outside before loading so the interior stays dry and the Pry-Guard II lock keeps working smoothly.
- Plan load placement before the first trip
- Check that the rear seat still latches
- Keep the latch and tailgate seal clean
- Dry the interior after wet or muddy trips
Specifications
| Brand | Tuffy |
|---|---|
| Part number | 130-01 |
| UPC | 70000445146 |
| Material | 16 gauge steel |
| Color | Black |
| Length | Full length |
| Storage capacity | 2520 cubic inches |
| Latch | 1/4 inch steel |
Vehicle fitment
It fits 1976–1986 CJ7, 1987–1995 Wrangler YJ and 1997–2006 Wrangler TJ models, each with the mounting kit for that application.
Each application needs its own mounting kit: 026 for CJ7, 045 for YJ, 038 for TJ 1997-2002 and 078 for TJ 2003-2006. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
An OEM factory seat is required for the listed mounting kit. Select the kit for your model years before mounting the drawer.
What’s included
The drawer is included. Mounting kits are sold separately for each application.
Not included: Mounting kit, which is sold separately per application.














