Overview
The Tuffy Security Drawer, part number 145-01, is a 16 gauge steel drawer that mounts behind the rear seat in an FJ Cruiser. It is built as a heavy duty, high security unit to protect tools, gear and other valuables.
The drawer slides on heavy duty roller bearings and can be locked. Its adjustable height mounting system creates storage under the drawer, and the side flaps open to reach the jack, power outlets and additional storage.
Key features
- 16 gauge steel construction
- Heavy duty roller bearing slides
- Lockable drawer
- Adjustable height mounting system
- Side flaps open to access the jack and power outlets
- Can be mounted with or without the OEM sub-woofer
Loading and securing the drawer
A steel drawer behind the rear seat adds weight to the rear of the vehicle, so load heavier items low and near the center. Keep the drawer from sliding under braking by using the lock and securing contents with straps or dividers. Adjust the drawer height so the contents do not rub the rear seat or the cargo area trim.
Roller bearing slides need periodic cleaning of dust and grit to stay smooth. Wipe the rails and check the lock and hinge points for stiffness. Tighten any loose mounting fasteners after the first few trips over rough roads, and recheck the side flaps for clearance before driving.
- Keep heavy items low and centered
- Clean the slides and check for grit
- Recheck fasteners after rough roads
- Keep side flaps clear of the jack and outlets
Specifications
| Brand | Tuffy |
|---|---|
| Part number | 145-01 |
| UPC | 70000413449 |
| Material | 16 gauge steel |
| Color | Black |
| Storage space | 12,474 cubic inches |
| Mounting | Behind the rear seat, adjustable height |
| Optional accessory | Divider kit, Part #141-07, available separately |
Vehicle fitment
The drawer is a direct fit behind the rear seat of the FJ Cruiser.
Confirm your vehicle’s year, model and trim before ordering. This drawer is covered for the FJ Cruiser only.
Installation notes
Check the sub-woofer position before mounting the drawer, since it can be installed with or without the OEM sub-woofer.
What’s included
The drawer with its mounting system and side flaps.
Not included: Divider kit (Part #141-07), which is available separately.
















