Overview
It is a set of control arm bushings for suspension systems. Confirm fit for your vehicle’s year, model and trim, and the control arm it replaces, before ordering.
Control arm bushing basics
Control arm bushings sit at the pivots where the arm connects to the frame and the axle. They allow controlled movement while keeping the wheel located. Over time the rubber or polyurethane wears, cracks or separates from its metal sleeve, which lets the arm move more than it should. That movement changes wheel alignment and makes the suspension feel loose.
Replacing bushings is easiest with a shop press or proper bushing tools, and the arm should be tightened with the suspension loaded at normal ride height. Hanging the suspension at full droop can preload the new bushing and cause early wear. Have the alignment checked afterward.
- Look for cracked or split rubber
- Replace bushings on both sides together
- Check the arm for bending
Specifications
| Brand | Tuff Country |
|---|---|
| Part number | 91304 |
| UPC | 698815913044 |
| Product type | Control arm bushings |
| Category | Suspension accessories |
| Manufacturer part code | T/C91304 |
| Listed fitment type | Universal fit |
Vehicle fitment
Confirm fit for your vehicle’s year, model and trim before ordering, since the bushing must match the control arm it replaces.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Control arm bushings sit in the pivots that locate the axle, so pressing the old ones out and the new ones in is easiest with a shop press or proper bushing tools. Support the vehicle on rated jack stands, and tighten the arm bolts with the suspension loaded at normal ride height rather than hanging at full droop. Have the alignment checked afterward.









