Overview
The TeraFlex 1980986 is a steering stabilizer tuned by Fox Racing Shox for 1997–2006 Jeep Wrangler TJ models, 2004–2006 Wrangler LJ Unlimited models, and 2007–2016 Wrangler JK models. It fits 2-door and 4-door applications and is a single unit.
The shock body is aircraft-grade 6061-T6 heat treated aluminum with impact cold forged construction. An internal floating piston provides controlled turning with a responsive feel, and the 5/8 inch alloy steel shaft is heat treated and hard chrome plated for long lasting performance.
Key features
- Aircraft-grade 6061-T6 heat treated aluminum shock body
- Impact cold forged body construction
- Internal floating piston for controlled turning
- 5/8 inch heat treated alloy steel shaft with hard chrome plating
- Single stabilizer, Fox Shocks series
- Suited to 2-door and 4-door models
Aluminum body and shaft
An aluminum shock body is lighter than steel, which helps when the stabilizer is mounted on the front axle of a Wrangler. Aluminum also dissipates heat well during repeated damping on rough trails. The shaft is the exposed moving part, so its surface and the seals around it need regular attention.
Periodic inspection is the main care task. Look for fluid on the body, check the mounting hardware for loosening, and keep grit off the chrome-plated shaft. A boot where your setup allows one protects the shaft from mud and water. After any suspension or steering change, have the steering checked for play and alignment.
- Look for fluid around the seals
- Wipe grit from the exposed shaft
- Check mounts and hardware for loosening
- Replace the boot if it tears
Specifications
| Brand | TeraFlex |
|---|---|
| Part number | 1980986 |
| UPC | 843885005889 |
| Body material | Aircraft-grade 6061-T6 heat treated aluminum |
| Shaft | 5/8 inch alloy steel, heat treated, hard chrome plated |
| Piston | Internal floating |
| Type | Stabilizer only |
| Series | Fox Shocks |
| Single or dual | Single |
| Shock boot | Not included |
| Fitment type | Direct fit |
Vehicle fitment
Based on the TeraFlex fitment list, the 1980986 covers these Wranglers:
- 2007–2016 Jeep Wrangler (JK) (70th Anniversary, Rubicon, Sahara, Sport, Sport S, X, and the Unlimited versions of those trims)
- 2004–2006 Jeep Wrangler (LJ) (Unlimited and Unlimited Rubicon only)
- 1997–2006 Jeep Wrangler (TJ) (65th Anniversary Edition, Rubicon, SE, Sahara, Sport, X)
Fitment does not cover the 2018 and later Wrangler JL or the Gladiator JT, and the LJ coverage is limited to the Unlimited models. Match your year, model and trim to the coverage before buying.
Installation notes
The kit is a stabilizer only. Check your mounting setup and hardware before installing the 1980986 on a Wrangler.
What’s included
The stabilizer itself is the item supplied. Check the package contents against your installation before starting.
Not included: shock boot.









