Overview
The adapter replaces the stock transfer case shift linkage on 4WD Wrangler TJ models with an NP231 transfer case. It is built for 1997–2002 Wrangler TJ models.
The stock linkage moves with the body and drivetrain separately, which can make shifting unreliable. This adapter bolts to the transmission and transfer case, so the linkage moves as one unit.
Key features
- Replaces the stock shift linkage with a bolted adapter bracket
- Heavy-duty design for demanding off-road use.
- Eliminates movement between the body and drivetrain
- Aimed at reliable shifting into all low-range positions
Shifter linkage and drivetrain movement
Shifting into low range depends on the linkage staying in the same position relative to the transfer case. When the stock linkage moves with the body and drivetrain separately, the lever can drift and make shifts hesitant. A bolted adapter holds the linkage on a common mount, so the motion stays consistent from the shifter to the transfer case.
Check the linkage after installation and at regular service intervals. Look for loose bolts, wear at pivot points and any binding through the full range of motion. If the shifter feels sloppy or resists engagement, inspect the connection before assuming the transfer case itself is worn, since the linkage is a common cause. Keep the bolts snug and recheck them after rough trail use.
Specifications
| Brand | TeraFlex |
|---|---|
| Part number | 4947100 |
| Transfer case | NP231 |
| Mounting | Bolts to transmission and transfer case |
Vehicle fitment
It is for 1997–2002 Jeep Wrangler (TJ) models in the SE, Sahara, Sport and X trims.
Confirm your transmission type before ordering.
Installation notes
Heavy modifications are needed with an AX15 transmission. Check the linkage for clearance after installation.
What’s included
One shift linkage adapter kit.









