Overview
The TeraFlex 4959101 is a left sway bar mount for a Dana 30 axle. It raises the sway bar mount up and out of the way to make clearance for custom steering components. The mount is laser cut and formed from 3/8 inch steel.
Key features
- Raises the sway bar mount for steering clearance
- Laser cut and formed from 3/8 inch steel
- Dana 30 left side mount
- Universal fit, left Dana 30 side
Sway bar mounts and steering clearance
A sway bar mount is the bracket that holds the bar to the axle housing. Raising the mount is a common choice when custom steering parts need more room, because a stock mount can sit in the path of tie rods or a drag link. Any change to the mount location changes how the bar loads the axle, so the change should be planned rather than guessed.
Measure clearance with the steering assembled and turned through its full range, not just at rest. Check that welds on the mount are sound and that the bar still clears the frame and brake lines after any change. Re-check the mount hardware after the first few trail runs, since shock loads loosen bolts early.
- Turn the steering to full lock during the clearance check
- Inspect welds and mounting holes for cracks
- Verify the bar still clears the frame
Specifications
| Brand | TeraFlex |
|---|---|
| Part number | 4959101 |
| UPC | 843885003380 |
| Mount side | Left (Dana 30) |
| Material | Steel, 3/8 inch thick |
| Fitment | Universal fit |
Vehicle fitment
This mount is a left side Dana 30 part. Confirm that your axle is a Dana 30 before ordering.
No vehicle year, make, model or trim is named for this mount. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
This mount is meant for vehicles that need clearance for custom steering components. Check that clearance against your steering setup before fitting it.
What’s included
One left side Dana 30 sway bar mount, part number 4959101.








