Select your vehicle
-13%

Rubicon Express TJ Front Sway Bar Mount – RE9992

Rubicon Express

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Fits the Jeep TJ (1997–2006 Wrangler)
  • Pair of front sway bar mounts laser cut from 3/16 in steel
  • Welding required for installation
  • Bare steel finish

Description

Overview

The Rubicon Express TJ front sway bar mount, part number RE9992, is a pair of brackets for mounting a custom front axle in a Jeep TJ. The brackets are made for the 1997–2006 Jeep Wrangler TJ, and installation requires welding.

The brackets are laser cut from 3/16 inch cold rolled steel and CNC formed, which gives them a precise fit for custom axle mounting.

Key features

  • Front sway bar mounts for a custom front axle
  • Laser cut from 3/16 in cold rolled steel
  • CNC formed for a precise fit
  • Sold as a pair
  • Bare steel finish

Before welding the brackets

Custom axle mounts put the axle’s load into the frame, so the brackets are only as good as the welds and the surface they sit on. Clean the frame area down to bare metal, check that the mounting points line up with the axle, and fit the brackets dry before any welding starts. Tack them in place and check alignment again before finishing the welds.

Steel brackets like these should be welded by someone who understands suspension loads and weld quality. Inspect the welds after the first trail outings, looking for cracks or distortion near the heat-affected area, and re-check the axle mounting fasteners at the same time. Protect the bare steel with paint or coating if the brackets will see moisture or salt.

  • Measure the axle mounting points before cutting or drilling
  • Clean all contact surfaces to bare metal
  • Re-check welds after the first trail runs

Specifications

Brand Rubicon Express
Part number RE9992
UPC 614901442533
Axle location Front
Material 3/16 in cold rolled steel
Finish Bare steel
Installation Welding required
Quantity Pair

Vehicle fitment

Based on the product title and description, these front sway bar mounts are for the 1997–2006 Jeep Wrangler TJ. The TJ name does not cover the YJ, JK, JL or LJ.

Confirm your vehicle’s year, model and trim before ordering.

Installation notes

The brackets are welded in place. Have the welding done by someone experienced with suspension brackets.

What’s included

A pair of front sway bar mounts.

Not included: the custom front axle the mounts are designed to hold.

SKU: R/ERE9992 Category:

Specification

Shipping weight 2.35 lbs
Package dimensions 9.00 × 4.00 × 0.80 in
brands

Fitment

VehicleYearsTrims
Jeep Wrangler (TJ) likely fits1997–2006All

Vehicles marked "likely fits" are inferred from the product description rather than a manufacturer fitment list. Please confirm fitment with the manufacturer before ordering.

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Does the Rubicon Express RE9992 fit a Jeep TJ?

Yes. It is a TJ front sway bar mount, made for mounting a custom axle in a Jeep TJ. Other Wrangler generations are not covered.

Does the RE9992 need welding?

Yes. Welding is required to install the brackets, so they are not a bolt-on part. Have the welding done by someone experienced with suspension brackets.

What material are the brackets made from?

They are laser cut from 3/16 inch cold rolled steel and then CNC formed. The pair is sold together, and the finish is bare steel.

Can these brackets be installed without a welder?

No. The brackets are designed to be welded in place, so a bolt-on installation is not possible. Have an experienced welder complete the work, since weld quality affects how the axle is held.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon