Overview
The TeraFlex ARB Compressor Under Seat Mounting Kit, part number 1184120, mounts an ARB on-board twin air compressor under the front passenger seat of a 2007-2018 Jeep Wrangler JK Unlimited. It fits the JK Unlimited only, so other Wrangler generations are not covered.
The kit gives the compressor protection from damage and the elements. It positions the manifold and locker solenoids next to the compressor for simple hose routing, and it includes a vent exhaust hose kit that carries fumes to the outside of the vehicle.
Key features
- Mounts an ARB on-board twin air compressor under the front passenger seat
- Manifold and locker solenoids mount beside the compressor for simple hose routing
- Includes a vent exhaust hose kit that routes fumes to the exterior of the vehicle
- Built for maximum protection from damage and the elements
Keeping the seat-mounted setup working
A compressor under a front seat gets less airflow than one mounted in the open, so heat and dust can build up around the housing over time. Keep the space beneath the seat free of loose gear and cargo that could press on the hoses. Good ventilation around the unit helps the motor run cooler during long inflation sessions on the trail, and it keeps the solenoids dry when the floor gets wet.
Hoses and wiring are the parts most often replaced with this kind of setup. Look for cracks, stiffness, or rubbing where a line passes a sharp edge or the seat frame. Route lines so they sit clear of the seat bolts and any moving seat tracks. Check solenoid connectors for corrosion after wet trail runs, and swap any worn clamp before vibration works a hose loose.
Specifications
| Brand | TeraFlex |
|---|---|
| Part number | 1184120 |
| UPC | 843885034155 |
| Compressor | ARB on-board twin air compressor |
| Mounting location | Under the JK Unlimited front passenger seat |
| Included | Vent exhaust hose kit |
Vehicle fitment
It fits the 2007-2018 Jeep Wrangler JK. Trim levels are not narrowed.
Other Wrangler generations such as the TJ, LJ and JL, and other Jeep models, are not covered by this kit. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the bracket sits under a front seat, plan the solenoid and hose routing before final mounting. Disconnect the battery before working near the compressor’s wiring.
What’s included
The kit includes a vent exhaust hose kit. Check the package contents against your installation before starting.
Not included: The ARB compressor, which the kit is designed to hold.














