Overview
The Supersprings SSA18 is a rear leaf spring helper for the 1995–2004 Toyota Tacoma in the Base, Limited, Pre Runner and SR5 trims. It mounts directly above the rear leaf springs and works alongside the factory suspension, kicking in when extra load is applied.
The SSA18 adds 800 to 6000 lbs of capacity. Its added spring rate helps reduce rear-end sag and improve towing, and its anti-sway design reduces body roll during cornering, strong crosswinds and buffeting from passing traffic.
Key features
- Provides 800 to 6000 lbs of additional capacity
- Direct-fit installation above the rear leaf springs
- Adjustable design
- Anti-sway properties that Supersprings says reduce body roll and improve driver control
- Mounting kit PN[MTKT] included
Tacoma load support basics
A rear leaf spring helper supports the back of a pickup when weight is added, which keeps the rear end from dropping as far under a load. It works alongside the factory springs and engages mainly when extra weight is applied. Its effect is most noticeable when hauling cargo or towing, and it has little influence when the truck is empty.
Smaller pickups like the Tacoma carry a lower payload, so the gross vehicle weight rating matters more. Check the shocks, rear bushings and tires, since they share the extra load. Look at the helper mounts for cracks or loose fasteners after the first loaded trips. Retighten hardware as needed and re-check the setup after any suspension work.
- Inspect shocks and bushings before installing
- Check tire load ratings for loaded use
- Retighten mount hardware after the first trips
Specifications
| Brand | Supersprings |
|---|---|
| Part number | SSA18 |
| UPC | 814699001299 |
| Additional capacity | 800 to 6000 lbs |
| Fitment type | Direct fit |
| Adjustable | Yes |
| Included hardware | Mounting kit PN[MTKT] |
Vehicle fitment
It fits the 1995–2004 Toyota Tacoma in Base, Limited, Pre Runner and SR5 trims. Other Tacoma years and trims are not covered.
Tacoma models outside 1995–2004, and trims not named above, are not covered by this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The mounting kit PN[MTKT] is included, so use the supplied hardware for the rear mount. Stay within the gross vehicle weight rating for your Tacoma, since the helper adds load capacity.
What’s included
The SSA18 includes mounting kit PN[MTKT]. Check the package contents against your installation plan before starting work.





