Overview
The Supersprings SSA36 is a rear leaf spring helper for the 2014–2017 Toyota Tacoma, covering the Base, Limited, Pre Runner, SR, SR5, TRD Off-Road, TRD Pro and TRD Sport trims. It installs directly above the rear leaf springs and works in parallel with the factory suspension.
The SSA36 adds 800 to 6000 lbs of capacity. Its added spring rate helps eliminate rear-end sag and improves towing capability, and its anti-sway design reduces body roll for better control.
Key features
- Provides 800 to 6000 lbs of additional capacity
- Direct-fit design mounted above the rear leaf springs
- Mounting kit PN[MTKT] included
- Anti-sway properties that reduce body roll.
Setting up rear support
A rear leaf spring helper supports the back of the truck when weight is added, which keeps the rear from settling as far under cargo or a trailer. It mounts above the factory leaf springs and shares the load with them. Its effect is most noticeable when the bed is loaded, and it adds little support when empty.
Before installing, look over the factory leaf springs, shackles, bushings and shock absorbers for wear, since they carry the extra weight with the helper. Check the tires for the load they are rated to carry. After the first loaded trips, recheck the mounting hardware and look for movement at the mounts. Keep the vehicle within its gross vehicle weight rating at all times.
- Inspect shackles and bushings
- Check tire load ratings
- Recheck mount hardware after loaded trips
Specifications
| Brand | Supersprings |
|---|---|
| Part number | SSA36 |
| UPC | 814699001633 |
| Additional capacity | 800 to 6000 lbs |
| Fitment type | Direct fit |
| Included hardware | Mounting kit PN[MTKT] |
Vehicle fitment
It fits the 2014–2017 Toyota Tacoma in the Base, Limited, Pre Runner, SR, SR5, TRD Off-Road, TRD Pro and TRD Sport trims. Other Tacoma years and trims are not covered.
Tacoma model years outside 2014–2017 are not covered, and trims not named in the list are not covered either. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The mounting kit PN[MTKT] is included, so use the supplied hardware for the mount. Keep the truck within its gross vehicle weight rating when it carries loads.
What’s included
The SSA36 includes mounting kit PN[MTKT]. Check the package contents against your installation plan before starting work.






