Overview
The Superchips TrailCal, part number SCI41051-JT, is a tire and gear calibration device for the 2020 Jeep Gladiator (JT). It is designed for owners who have changed their tires, gears or lift kit.
Tire and gear calibration is a common need for Jeep owners who have added larger tires, changed gears or installed a lift kit. TrailCal brings those settings into one dedicated device so they match the changes already on the vehicle. It addresses speedometer and shift pattern issues that can appear after such changes, and it can manage auto start/stop.
Key features
- Tire and gear settings for the JT Gladiator, for owners who have added larger tires or changed gears.
- 5 inch color touchscreen display on a dedicated device.
- Speedometer and shift pattern correction, which Superchips says addresses issues after tire and gear changes.
- Pitch and roll observation.
- Management of auto start/stop, a function Superchips highlights for JT owners.
- Monitoring of a range of data parameters from one device.
Matching settings to your build
Every change in tire diameter or gear ratio shifts how a vehicle reports speed and how the transmission chooses gears. A larger tire turns more slowly for the same road speed, so the speedometer may read low unless the settings are adjusted. Gearing changes can also affect how the vehicle holds a gear on grades or at highway speed, which is why a single adjustment rarely covers every change at once.
Write down tire size, axle ratio and lift height before adjusting any setting, and recheck after the first longer drive. Tire wear can change effective diameter over time, so a setting that worked when the tires were new may need review later. Inspect wheel speed sensor wiring whenever a new tire size is fitted, since disturbed wiring can cause inconsistent readings.
- Note tire size and gear ratio before any change
- Recheck speed readings after tire rotation or replacement
- Inspect sensor wiring after lift or wheel work
Specifications
| Brand | Superchips |
|---|---|
| Part number | SCI41051-JT (also referred to as PN 41051-JT) |
| Product type | Tire and gear calibration device (TrailCal) |
| Display | 5 inch color touchscreen |
| Vehicle application | 2020 Jeep Gladiator (JT) |
| Fitment | Direct Fit |
Vehicle fitment
It fits the 2020-2026 Jeep Gladiator (JT) with Launch Edition, Overland, Rubicon, Sport and Sport S trims. The 2020 model year is included in this coverage.
It does not fit the Jeep Wrangler JL or earlier Wrangler generations, or Jeep models other than the Gladiator. Verify year, model and trim against your vehicle before ordering.
What’s included
Review the contents before starting the installation.









