Select your vehicle

Jet Performance Products Ford Performance Module – 80020

Jet Performance Products

Shop Mazda B3000 Computer Programmers on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Plug-in tuning module for 2000 Ford Ranger XL and XLT and 2000 Mazda B3000 SE, SX and Troy Lee
  • Part number JET80020, one tune, claimed gain up to 30 horsepower
  • Monitor not included; not selectable on the fly

Description

Overview

The Jet Performance Products Ford Performance Module 80020 is a plug-in tuning module for the 2000 Ford Ranger in XL and XLT trims and the 2000 Mazda B3000 in SE, SX and Troy Lee trims.

Jet built the module for vehicles whose factory computer does not have a chip that can be easily replaced. It attaches externally to the vehicle computer and is claimed to add up to 30 horsepower by changing ignition spark advance, air-to-fuel ratios and transmission shifting.

Key features

  • Plugs into the outside of the vehicle computer, with no chip swap
  • Claimed gain of up to 30 horsepower
  • Changes ignition spark advance, air-to-fuel ratios and transmission shifting
  • One tune, with no monitor included
  • Not selectable on the fly

Plug-in tuning on older Fords

An external module works by changing how the engine computer controls spark timing, air-to-fuel ratio and transmission shift points. Because those controls depend on sensor input, a module can only work as well as the sensors and wiring feeding the computer. Verify the vacuum system and basic engine condition before expecting consistent results.

Owners of older trucks often find that worn spark plugs, dirty air filters and cracked vacuum lines affect drivability more than any tuning change. Keep these items in good order and review any diagnostic codes after installation. A module that changes transmission shifting may feel different at highway speeds, so check the feel on familiar roads first.

  • Replace worn spark plugs and wires
  • Check vacuum lines for cracks
  • Review codes after the first few drives

Specifications

Brand Jet Performance Products
Part number JET80020
Product Ford Performance Module
Number of tunes 1
Monitor included No
Selectable on the fly Not selectable
Fitment Direct fit
Claimed power gain Up to 30 horsepower (manufacturer claim)

Vehicle fitment

It fits the 2000 Ford Ranger in XL and XLT trims and the 2000 Mazda B3000 in SE, SX and Troy Lee trims. Fitment applies to the 2000 model year only.

Other Ford Ranger years, other Mazda B3000 model years and other Ford trucks are not covered. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

The module plugs in at the outside of the vehicle computer, so no chip has to be removed. Check the module against your computer connection before starting.

What’s included

One module with one tune.

Not included: a monitor.

Fitment

VehicleYearsTrims
Ford Ranger2000XL, XLT
Mazda B30002000SE, SX, Troy Lee

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Will the Jet 80020 fit a 2000 Ford Ranger?

Yes, for the 2000 Ford Ranger in XL and XLT trims. Other Ranger years are not covered, so check your vehicle's year, model and trim before ordering.

Does the 80020 module include a monitor?

No. A monitor is not included, so one would need to be purchased separately if you want it. The module provides one tune.

How much power does the Jet Ford Performance Module add?

The module is designed to add up to 30 horsepower by changing ignition spark advance, air-to-fuel ratios and transmission shifting. Results depend on the vehicle's condition, so treat that figure as a general target rather than a measured gain.

Can the tune be selected on the fly?

No. The module is not selectable on the fly, and it provides one tune, so there is no switching between tunes to do.

Will the module affect the check engine light?

It can if the change sets a fault or if the engine has an existing problem. Review codes after installation, and address misfires, vacuum leaks or sensor faults before assuming the module is the cause.

How do I remove the module?

Turn off the ignition, unplug the module from the computer connection, and store it with its tune intact. Check the connector pins for damage before reinstalling any other part.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Mazda B3000 Computer Programmers on Amazon