Overview
The Rigid Industries SR-Series SR-MF2 Single Row Mini 60 Deg. Diffusion LED Light, part number 932513, is a compact rectangular LED light in the range. It is a universal fit general mounting light, so it is not built for one vehicle.
Up to 111% more raw lumens come from improved LED technology. The compact size suits a flood light on a toy hauler, handlebar mounts on motorcycles and back bumper lighting on automotive applications. Other beam patterns are available in several optics, and the light has blacked-out circuit boards and new branding.
Key features
- Mini single-row LED design for tight mounting spaces
- Up to 111% more raw lumens from improved LED technology
- Diffusion model with 60 Deg. pattern, and other beam patterns available
- Flush mount type
- Rectangular light shape with a clear lens
- Suits toy hauler flood lighting, motorcycle handlebars and back bumper lighting
- New branding and blacked-out circuit boards
Mounting a flush light
A flush mount light sits level with the surface, so the cut needs to be clean and square. Mark the opening with a template, check behind the panel for wiring, brackets and fuel lines, and cut slowly to limit chipping. A clean edge helps the gasket or sealant hold and keeps water from tracking into the housing.
Wiring should be fused and routed away from moving parts, sharp edges and heat sources. Use a grommet where the wire passes through metal, and leave a small drip loop so water runs off before it reaches the connector. Power the light from a switch with a fuse sized to the light’s draw, and check the beam aim after mounting.
- Check behind the panel before cutting
- Use grommets where wire passes through metal
- Recheck beam aim after mounting
- Inspect the seal after washing or rough trail use
Specifications
| Brand | Rigid Industries |
|---|---|
| Part number | 932513 |
| UPC | 849774027857 |
| Bulb type | LED |
| Lens color | Clear |
| Light shape | Rectangular |
| Mounting type | Flush |
| Size | 0 to 10 inches |
| Light output | Up to 111% more raw lumens |
| Beam pattern | 60 Deg. Diffusion |
| Sold as | Single |
| Fitment | Universal Fit |
Vehicle fitment
It is a universal fit, so no vehicle years, makes or models apply. Common uses are toy haulers, motorcycles and back bumper lighting, and the flush mount needs a suitable opening on your vehicle.
The 60 Deg. Diffusion pattern is the model here, and other beam patterns are available, so pick the pattern you need before ordering.
Installation notes
Check the mounting surface and wiring route before you cut or drill for a flush mount.
What’s included
Sold as a single light. Check the package for mounting hardware and wiring before installing.









